2 0 2 0 G E N U I N E B R U N S W I C K

2020 GENUINE BRUNSWICK

302 | www.brunswickbowling.com

TABLE OF CONTENTS

Section 1 – GS Pinsetter Parts

GS Featured Products....................................................................................... 4

Elevator.................................................................................................... 6

Transport Band Assembly................................................................................... 8

Setting Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Ball Cushion and Pit Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Sweep Wagon .............................................................................................16

Drive Frame Assembly .....................................................................................18

Distributor.................................................................................................20

Ball Accelerator ...........................................................................................26

Electrical box ..............................................................................................28

Tools and Maintenance ....................................................................................30

Section 2 – Non Pinsetter Parts

Ball Li Assembly .........................................................................................34

Ball Return and Rack.......................................................................................38

Furniture ..................................................................................................40

Electrical and Scoring Components .........................................................................42

Section 3 – Hardware

Hex Head Cap Screws......................................................................................46

Socket Head Cap Screws...................................................................................51

Flat Head Socket Cap Screws ..............................................................................52

Button Head Socket Cap Screws ...........................................................................53

Lockwashers ..............................................................................................54

Hex Nuts ..................................................................................................55

Flat Washers ..............................................................................................57

Retaining Rings ............................................................................................60

Roll Pins ..................................................................................................61

Spirol Pins.................................................................................................62

Machine Keys..............................................................................................63

X-Washer Pins.............................................................................................64

X-Washers and Pins........................................................................................65

Sleeve Oilite Bearings......................................................................................66

Flanged Oilite Bearings ....................................................................................68

Ball Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Compression Springs.......................................................................................76

Tension Springs............................................................................................78

Index .....................................................................................................80

Safety Procedures........................................................................................90

Brunswick Electronic Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

www.brunswickbowling.com | 1www.brunswickbowling.com | 1

NOBODY KNOWS PINSETTERS LIKE

BRUNSWICK KNOWS PINSETTERS

Brunswick introduced its first automatic pinsetter in 1956 and has been on the leading

edge of pinsetter innovation ever since. Nobody knows pinsetters like Brunswick knows

pinsetters. So when it comes to OEM parts to support the maintenance and repair of your

pinsetters, Genuine Brunswick Parts are the obvious choice.

Brunswick engineers and mechanics work with suppliers to ensure the parts to support

both the A•2 and GS

series of pinsetters are exactly what is required in form, fit and

function. Brunswick designed the pinsetters, so who better to provide the parts needed

to ensure the pinsetters meet your expectations.

For some of the most critical parts necessary to achieve great pinsetter performance,

Brunswick has stepped it up a notch with Advanced Performance Genuine Brunswick

parts. Advanced Performance Genuine Brunswick parts are the cream of the crop and are

all backed by at least a 1-year warranty. Like all Genuine Brunswick parts, they are the

originals – precision engineered for your equipment, refined with knowledge that can

only be drawn from over 50 years of experience in the parts business.

To further enhance our knowledge of pinsetter operations we make a point of listening to

and working with the mechanics who spend their working days with the machines. Over

the years they have taught us a lot about the practical aspects of pinsetter operations.

And in many instances mechanics have given Brunswick ideas for new or improved

products that we have adopted. As you look through this catalog you will see many parts

that were the brainchild of mechanics.

Buy Genuine Brunswick Parts and rest assured you are getting the highest-quality parts,

designed to keep your center running smoothly.

2 | www.brunswickbowling.com

GS PINSETTER PARTS

www.brunswickbowling.com | 3

GS | PINSETTER PARTS

4 | www.brunswickbowling.com

ADVANCED PERFORMANCE

PIN GUIDE/STOP

See page 20 for additional

information.

47-097417-000

GS | FEATURED PRODUCTS

BELT WELD KITS,

IRONS, AND ACCESSORIES

See page 30 for additional information.

ADVANCED PERFORMANCE

CHAIN GEAR

See page 18 for additional information.

47-075474-009

ADVANCED PERFORMANCE

NEX GEN REAR DISPLAY PACKAGE

See pages 6 and 28 for additional information.

47-861048-403

ADVANCED PERFORMANCE

OEM TRANSPORT BAND

See page 8 for additional information.

11-635201-000 – Short Pit

11-053581-000 – Long Pit

ADVANCED PERFORMANCE

IMPACT STRIP (PAIR)

See page 14 for additional information.

47-026102-009

ADVANCED PERFORMANCE

DOUBLE DAMPERS - GS AND GS-X

SPOTTING TONGS

See page 10 for additional information.

47-051770-600 - Standard (Pkg of 10)

47-051771-600 - Oversized (Pkg of 10)

www.brunswickbowling.com | 5

GS | FEATURED PRODUCTS

UNIVERSAL PIN STATION

See page 20 for additional information.

47-094792-009 – 2, 3, 4, 8, 9 pin location (shown large)

47-094793-009 – 1, 5, 6 pin location (not shown)

47-094794-009 – 7, 10 pin location (not shown)

TWO PIECE SPUR GEAR

See page 20 for additional information.

47-274669-004

SETTING TABLE CABLE ASSEMBLY

(NEX GEN)

See page 10 for additional information.

47-245420-004

LED LIGHT FIXTURE ONLY

GS, GS-X AND STRING PIN /230/380V

See page 113 for additional information.

47-863001-000

PIN FEED EXTENDER KIT

See page 6 for additional information.

47-862507-000

BALL STOP

See page 99 for additional information.

47-277455-009

6 | www.brunswickbowling.com

NO STEP DECAL

“No Step” label for Pin Deﬂector

Support Bracket.

11-682569-000

PIN FEED EXTENDER KIT

Improves elevator pin loading eﬃciency

which decreases pin distributor time outs

by up to 90%.

• Kits are packaged for lane pairs

• Comes with instructions

• Requires purchase of one drill ﬁxture per

center (47-862508-000). Sold separately

and includes instructions

47-862507-000

NEX GEN FIRMWARE UPGRADE

Easy to replace ﬁrmware provides new

features and options:

• Fine tune table position aer a non-strike

ﬁrst ball to improve pin collection and loading

eﬃciency, while noticeably reducing pinsetter

noise in the center

• Choose to drop the rake when the lane is

turned oﬀ, reducing ball jams and protecting

staﬀ working in the pit area

• The ball accelerator can immediately shut

down upon detection of an associated error,

providing additional protection for motors and

equipment

• A new timing option will return a ball even aer

the lane has been turned oﬀ

47-862877-403

47-862509-403 – PKG - Nex Gen Firmware

with two 24 volt LED bulbs

GS | ELEVATOR

STATUS LIGHT BULBS

Extend the life of a trouble light - up to

50,000 hours (24 volt assemblies only).

47-013817-004 – 12 volt assy series 42 and below

47-014687-004 – 12 volt assy series 43-465

47-015646-004 – 24 volt assy series 466 and above

47-223170-000 – 12 volt LED bulb only (2 pack)

47-861047-000 – Advanced Performance

24 volt LED bulb only (2 pack)

ADVANCED PERFORMANCE

NEX GEN REAR DISPLAY PACKAGE

Reduce down time and improve safety with

GS Rear Displays.

• View errors or error codes from the back of

the machine

• Nex Gen package includes updated ﬁrmware

47-861048-403 – Nex Gen

47-861046-000 – Consolidated

(See page 28 for additional information)

www.brunswickbowling.com | 7

FOUL LINE

Rear View of Elevator

1 47-015646-004 24 Volt Trouble Light

Assembly – Nex Gen

1 47-014687-004 12 Volt Trouble Light

Assembly – Consolidated

1 47-861047-000 AP - 24 Volt LED Bulb (Pkg of 2)

1 47-223170-000 12 Volt Bulb

2 47-014017-003 Shovel Guide

3 47-013951-003 Wedge Guide

4 47-014008-003 5/8" Chain w/ Shovel Pins

5 47-014060-003 Ejector

6 47-014917-009 Pin Count Switch – GS 96 and prior

6 47-014918-003 GS 98/GS-X

7 47-014761-003 Centering Guides

8 47-013532-009 Pin Shovel Assembly

9 47-013992-001 LH Front Pin Deflector

10 47-013991-001 RH Front Pin Deflector

11 47-862507-000 Pin Feed Extender Kit

11 47-862508-000 Drill Fixture, Pin Feed Extender

12 47-024036-002 Pin Deflector Support Bracket

13 47-026103-000 RH Pin Deflector ( 8mm)

13 47-026104-000 LH Pin Deflector (8 mm)

14 47-014009-004 Spacer

15 47-023660-004 Cushion Cap

16 47-861048-403 AP - Nex Gen Rear Display Pkg

17 47-861046-000 AP - Consolidated Rear Display Pkg

18 47-013990-002 Elevator Guard

19 47-011053-004 Deflection Chain Gear

20 47-011130-004 Bearing Bolt

21 47-860016-000 Pkg-Arm, Pin Count Switch (6)

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | ELEVATOR

8 | www.brunswickbowling.com

THREADED ROD

OEM threaded rod for transport band

bearing housing.

47-024093-004

SIDE FRAME REPAIR KIT

This kit repairs stripped or missing insert

nuts on the transport band side frames.

• Nut plate has peel and stick tape

for easy installation

• Kit comes with one plate and one

M10 x 60mm socket ﬂat head screw

47-276153-009

CERTIFIED TRANSPORT BAND

Utilize this lower cost belt that still

maintains the performance of GS®

pinsetters.

• Double-ﬁnger splice construction with

wider joint provides more surface

contact, relieving impact stress more

eﬀectively

• Thicker material gives the belt higher

ultimate tensile strength and higher

bearing load

• Consider adding Pin Feed Extender Kit (pg. 6)

to minimize time outs

11-635201-100 – Short Pit (1440 mm x 2020 mm)

V-BELT PULLEY

OEM V-belt pulley, for transport

band drive.

47-024004-003

ADVANCED PERFORMANCE

OEM TRANSPORT BAND

Brunswick’s best transport band! Improve

performance with this “top of the line” transport

band. Made to stringent speciﬁcations to

assure it will run straight and will not stretch,

assuring long life.

• Consider adding Pin Feed Extender Kit (pg. 6)

to minimize time outs

11-635201-000 – Short Pit (1440 mm x 2020 mm)

11-053581-000 – Long Pit (1440 mm x 2450 mm)

GS | TRANSPORT BAND ASSEMBLY

www.brunswickbowling.com | 9

SIDE FRAME

REPAIR KIT

2STUD

OLD

3STUD

NEW

1 47-025175-003 LH Rear Board Assy, odd lane

1 47-025176-003 RH Rear Board Assy, even lane

2 11-052401-001 Slotted. Pan Head. Screw

8mm x 50mm (GS-92)

2 11-052929-000 Slotted. Pan Head. Screw

10mm x 50mm (GS-96 and above)

3 11-052150-001 Finishing Washer 8mm (GS-92)

3 47-024740-004 Finishing Washer

5.3mm x 28mm x 10.2mm

(GS-96 and above)

4 47-023663-004 Rubber Washer (GS-92)

4 47-861042-001 Rubber Washer (GS-96 and above)

5 11-052019-001 Flat Washer (GS-92)

5 47-024741-004 Flat Washer (GS-96 and above)

6 47-024744-009 Board Screw Kit 10mm

7 47-023959-003 Front Board Assembly

8 47-023915-004 Rubber Spacer

9 11-135400-000

Rubber Well Nut, Series 43-76 (not shown)

9 47-276153-009 Side Frame Repair Kit

10 11-635201-000 AP - OEM Transport Band Belt

10 11-635201-100 Certified Transport Band Belt

11 47-025051-001 LH Short Roller Assy (Rear) Odd Lane

11 47-024905-001 RH Short Roller Assy (Rear) Even Lane

11 47-023669-002 Rear Roller Assy (Long Pit)

12 47-024736-009 LH Transport Band Side Frame

13 11-051858-001 Retaining Ring 15mm

14 47-020942-003 Roller

15 47-020943-004 Roller Bushing

16 47-861011-001 Flat Washer 17mm (Pkg of 10)

17 47-023981-002 Roller Assy, 3-stud (Front)

18 47-023933-004 Shaft - Front

19 47-025178-003 Bearing (3-Stud) with bushing

20 47-020908-003 End Cap w/Bearing (2-Stud)

21 47-026371-009 Spacer Bushing - 13.5 mm (Pkg of 2)

22 47-024735-009 RH Transport Band Side Frame

23 47-024094-003 Housing

23 11-430055-000 Deep Groove Ball Bearing

23 11-051902-001 Retaining Ring 52mm

24 47-024330-004 V-Belt Pulley 100mm

24 47-025049-004 V-Belt Pulley 125mm

25 11-053909-000 V-Belt (use 100mm Pulley)

25 11-053910-000 V-Belt (use 125mm Pulley)

26 47-024309-004 Spring

27 11-052050-001 Flat Washer 10.5mm

28 47-024093-004 Threaded Rod 10mm x 140mm

29 11-051703-001 Hex Nut 10mm

30 47-274332-002 Bearing Block Repair Kit

31 47-861018-001 Slotted. Pan Head. Screw

8mm x 60mm (GS-92)

31 11-052930-000 Hex Head. Cap Screw

10mm x 60mm (GS-96 and above)

32 47-026370-009 Spacer Bushing - 21 mm (Pkg of 2)

33 47-860013-000 O-Ring (4/pkg)

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | TRANSPORT BAND ASSEMBLY

10 | www.brunswickbowling.com

LINK ASSEMBLY

Keep one of these links in your GS-X spare

parts inventory at all times.

• Allows for stable connection from one swing

sha to the other

• Provides adjustment to pin spotting from

front to back on the pin deck when new pins

are spotted on the pin deck

47-055002-002

OEM SETTING TABLE CABLE

ASSEMBLY (NEX GEN)

Based on ﬁeld feedback, this assembly has

been improved to provide added ﬂexibility

and protection. Additionally, to reduce

movement and wear, the cable attachment

has been modiﬁed for an optimized ﬁt.

• Standard on production

pinsetters series 686 and above

47-245420-004

SETTING TABLE LEVER

Improved design with extra material and

radius to the tab area of this part.

• Secures pin holders in the horizontal

position during pinsetter operation

• Tab connects to the setting table latch

assembly

47-054989-001

TABLE LATCH

Does your table try and set pins on the ﬁrst

ball cycle? If so your table latch may be

broken. From mechanics requests we have

increased the radius on this part to make it

stronger and less prone to breakage.

47-051674-004

SETTING TABLE REPAIR KIT

GS-X/CPO SERIES 424 AND ABOVE

Used between the rear swing sha

mounting support brackets for extra

support.

• Bent or broken supports will not allow

the swing shas of the table to operate

correctly during pinsetter operation, leading

to wobbling pins when a new rack is set

• Hardware included

47-275620-009

SETTING TABLE REPAIR KIT

GS SERIES 13 THROUGH 574

Used to prevent the back portion of the GS-

Series pinsetters setting table from bending

upward due to pin impact. If excessive,

this bending can obstruct movement and

improper operation of the spotting tong.

• Uses 7 existing holes and 2 new holes drilled

through the table frame. The repair plate

attaches to the bottom of the setting table

across the entire width of the frame (from 7

pin to 10 pin) using 9 - hex socket, ﬂathead

screws

47-275850-009

CABLE GUIDE CLIPS

• Use to fasten cables to cable guide

47-055167-003

• For pinsetter series 424 and above

47-861052-000 – (Pkg of 10)

OEM DAMPER STANDARD SINGLE

47-051758-003

GS | SETTING TABLE

ADVANCED PERFORMANCE

DOUBLE DAMPERS - GS AND GS-X

SPOTTING TONGS

• Holds pins more securely by gripping in two

places

• Pins are held higher and at the same level

• Works well with new pins, which can slip

more easily

• Oversized dampers work well on worn

spotting tongs

and should be installed on 10-pin side of

spotting tong

• Use standard and oversized the same way

as original single dampers. Installation

instructions included

47-051770-600 - Standard (Pkg of 10)

47-051771-600 - Oversized (Pkg of 10)

ADVANCED PERFORMANCE

GS OVERSIZE SPOTTING TONG

DAMPER

Extends life and eliminates pinsetter

downtime with these oversize tongs.

• Install on 10 pin side of spotting tong

• Used on all series GS machines, including

GS-X

• Ships in packages of ten

47-051758-500 – Vinyl Black

47-051758-600 – Urethane Clear

www.brunswickbowling.com | 11

1 47-055177-001 Setting Table Assembly Frame

1 47-055166-009 Setting Table Complete

2 47-245164-001 Setting Table Harness

3 47-275620-009 Setting Table Repair Kit

4 47-053513-009 Toothed Rack (center)

5 47-051565-002 Toothed Rack (front)

6 47-051635-001 Geared Rack

7 47-861008-001 Truss Hd. Screw 6mm x 16mm

8 47-051625-004 Shaft Support

9 11-052008-001 Flat Washer (6.4 mm)

10 11-051743-001 Locknut 6mm

11 47-071615-004 Square Shaft Gear

12 11-051878-001 Truss Hd. Screw 8mm x 45mm

13 47-052021-004 Spacer Bushing

14 47-052020-004 Gear

15 47-052022-004 Spacer Ring

16 11-052017-001 Flat Washer 8.4mm

17 11-051744-001 Locknut 8mm

18 11-052019-001 Flat Washer 8.4mm

19 47-051617-004 Spacer Bushing

20 47-051616-004 Gear

21 47-051682-004 Stop

22 11-051028-001 Truss Hd. Screw 6mm x 25mm

23 11-051877-001 Socket Hd. Screw 6mm x 25mm

24 47-051632-004 Gear

25 47-051633-004 Spacer Bushing

26 11-052037-001 Flat Washer 6.4mm

27 47-243027-004 Switch - Complete

28 47-053812-004 Switch Protector

29 47-055117-009 Spotting Tong (1,4,5,6)

29 47-055118-009 Spotting Tong (2,3,7,8,9,10)

30 47-054896-002 R.H. Tong

31 47-055148-002 L.H. Tong

32 47-051770-600 Double Damper - Standard

32 47-051771-600 Double Damper - Oversized

32 47-051758-003 Damper - Standard Single

32 47-051758-600 AP - Oversized Urethane Damper

32 47-051758-500 AP - Oversized PVC Damper

33 47-054902-002 Deck Plate

34 47-054897-003 L.H. Spotting Tong Pivot

35 47-054898-003 R.H. Spotting Tong Pivot

36 47-861050-000 Speed Nut 8 mm (10/pkg)

37 47-051762-004 Connecting Link

38 47-054900-003 LH Lever (1, 4, 5, 6)

38 47-054901-003 RH Lever ( 2, 3, 7, 8, 9, 10)

39 47-054899-003 Gear

40 11-054459-000 Self Tapping,

Torx Screw K60 x 16mm

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | SETTING TABLE

12 | www.brunswickbowling.com

TECH TIP

If you receive a

“Multiple Spotting

Tong Switch Error”

Code /76, you may

want to add a garden

hose washer to the

top of the large gear

at the le side of

the setting table. By

adding the garden hose

washer under the nut

and washer, you will

prevent the gear rack

from bouncing oﬀ the

stop blocks – acting

like a second clutch for

the gear racks.

TUBE GUIDE

Provides long-lasting consistent support

for table setting and resetting of pins.

47-085349-003

SWITCH ACTUATOR

Improved pin holder switch actuation

reliability. Flatter contact surface of the

switch actuator reduces double loading

of the setting table pinholders.

47-054985-001

PINHOLDER SOLENOID

Prevent setting table jams with these

solenoids.

• Solenoid comes with the plunger

• Powerful solenoid made from high grade iron

• Designed to activate pin holder pin grippers

properly long term

99-060242-004

For tables with round swing shas

99-060351-004

For tables with square swing shas

GS-X TABLE SAFETY SUPPORT

This support prevents the setting table

from falling while the pinsetter is in the

home position for maintenance needs.

It improves maintenance safety, and

prevents pinsetter damage.

• Easily installs on pinsetter

• Only for use with the GS-X Tower-down

Pinsetters

• Includes installation instructions

47-860011-000

PINHOLDER ASSEMBLY COMPLETE

47-053850-009 - GS-10 and GS-92

(universal electrical

system)

47-054699-009 - GS-96 - GS-98

47-055314-009 - GS-X/CPO

PIN HOLDER WITH DAMPERS

47-054689-009 - GS-10, GS-92,

GS-96 - GS-98

47-054980-201 - GS-X/CPO

GS-X SWITCH FINGER

Prevent broken or worn switch ﬁnger leading

to pin loading errors with this improved

design.

• Allows for extended wear

• Check pinholders for worn components

regularly for ultimate performance

47-054982-002

MICRO SWITCH

OEM pin holder micro switches. Single, for

GS 92 and earlier, Double for GS 96 and 98,

and GS-X for all GS-X machines.

47-054700-004 – Double (Shown large)

47-053635-004 – Single, cherry

47-055323-004 – GS-X

GS | SETTING TABLE

www.brunswickbowling.com | 13

1 47-050308-004 Damper

2 47-054980-201 Pin Holder w/Damper GS-X

3 47-054981-002 Pin Gripper

4 11-055500-001 Hex Nut 6 mm

5 47-054986-004 Grip Ring

6 47-054982-002 Switch Finger

7 47-052124-004 Counter Weight

8 47-055005-004 Tension Spring

9 47-054984-004 Gear

10 47-055323-004 Micro Switch

11 47-055001-004 Clip (Micro Switch)

12 47-055008-004 Tension Spring

13 47-054988-003 Switch Button

14 47-054985-001 Switch Actuator

15 47-055006-004 Torsion Spring

16 47-055328-003 Connector Clip

17 47-054983-002 Drive

18 47-054987-004 Solenoid Spring

19 47-055004-004 Solenoid Plunger

19 99-090349-004 O-Ring for Plunger

20 99-060351-004 Solenoid - Only

21 47-055785-004 Mount Plate - Steel

22 47-055003-004 Mount Plate

23 47-861040-001 Washer 6.1 mm (Pkg of 10)

24 11-051014-001 Hx Hd. Cap Screw 6mm x 45mm

25 47-860005-000 Pivot Pin (Pkg of 10)

26 47-054298-001 Pin Detector Plate w/Pin

27 47-055314-009 Pinholder Assembly - GS-X/CPO

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | SETTING TABLE

14 | www.brunswickbowling.com

IMPACT STRIP

Inspect and replace damaged impact strips

at all times as part of normal maintenance

to the ball cushion assembly.

• Damaged impact strips can lead to possible

ball and pin damage

• Made to withstand repeated ball

impacts to the pit cushion

47-021010-003

PIT CURTAIN

Smooth surface is easy to clean, non-

marking, and oil resistant.

47-021084-004

BALL CUSHION BOARD WITH FACING

Minimize ball energy with this

special cushion facing.

• Cushion molded to board to

prevent delaminating

• Includes 47-274888-009

ball door ﬂap kit

47-025044-009 – LH

47-025045-009 – RH

BALL DOOR FLAP KIT

Minimize “pins in the ball door.”

47-274888-009

ADVANCED PERFORMANCE

BALL CUSHION FRAME

Eliminate risk of failed Ball Cushion Frame

with a design that conforms to stringent

speciﬁcations.

• This frame has increased material thickness

where necessary

• Made from high grade steel

• Improved welding and shock mounting

system

47-025639-009

ADVANCED PERFORMANCE

IMPACT STRIP (2/PKG)

• Lasts 3-5 times longer than the original

impact strips

• Made from ultra-high molecular weight

polyethylene

• Save time checking and replacing worn parts

• Avoid costly damage from broken strips

47-026102-009

BALL CUSHION HYDRAULIC

SHOCK ASSEMBLY-COMPLETE

Preserve pit cushions with properly

maintained shocks. For all GS pinsetter

models.

47-861049-009 – Replacement O-Ring

(5/pkg)

99-026121-000

CUSHION ADJUSTMENT

HARDWARE KIT

Reduce wear on the Cushion Rubber Bumper

– 11-053578-000. Worn cushion bumpers

can create ball return issues.

47-862108-000

GS | BALL CUSHION AND PIT CURTAIN

www.brunswickbowling.com | 15

1 47-025639-009 AP-Ball Cushion Frame w/ Bracket

2 47-021872-003 Top Ball Cushion Board

3 47-025045-009 RH Ball Cushion Board

with Facing, even lane

3 47-025044-009 LH Ball Cushion Board

with Facing, odd lane

4 47-274888-009 Ball Door Flap Kit

5 47-026102-009 AP Impact Strips (2/pkg)

5 47-021010-003 Impact Strip (Black) 1 ea

6 11-051055-001 Hx Hd. Cap Screw 8 mm x 60 mm

7 47-023660-004 Cap

8 11-052018-001 Flat Washer 10.5mm

9 11-051744-001 Locknut 8mm

10 11-052618-001 Carriage Bolt 10mm x 50mm

11 11-051745-001 Locknut 10mm

12 47-020953-004 Stop Collar

13 99-010108-004 Bearing

14 47-020947-003 Bearing Block

15 11-053578-000 Rubber Bumper

16 11-051704-001 Hex Nut 8mm

17 47-021466-001 Bearing Block

18 11-051706-001 Hex Nut 12mm

19 47-861010-001 Flat Washer 13mm (Pkg of 20)

20 11-051703-001 Hex Nut 10mm

21 11-051771-001 Lockwasher 10mm

22 11-052050-001 Flat Washer 10.5mm

23 11-051012-001 Hx Hd. Cap Screw 10mm x 70mm

24 11-051564-009 Sckt Hd. Cap Screw 12mm x 60mm

25 11-051772-001 Lockwasher 12mm

26 47-020948-003 Transverse Bar

26 47-024077-003 Transverse Bar, Short Pit

27 47-862108-000 Cushion Adjustment Hardware Kit

28 11-052015-001 Flat Washer 13mm

29 47-021110-004 Spacer

30 11-051071-000 Hex Hd. Cap Screw M10 x 60mm

31 47-025638-004 Spacer

32 11-051058-001 Hex Hd. Cap Screw 10mm x 55mm

33 47-071602-004 Compression Spring

34 99-026121-000 Ball Cushion Hydraulic Assy

35 11-055351-000 Sealing Ring, all GS Shocks

36 47-021108-004 Spacer

37 47-025637-003 Bracket

38 11-051515-001 Socket Hd Cap Screw 6mm x 18mm

PART INDEX

For complete schematics please refer to the

GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/

tech-support/documentation/parts-catalogs.

GS | BALL CUSHION AND PIT CURTAIN

16 | www.brunswickbowling.com

SWEEP SHOCK ABSORBER

Strong plunger sha manufactured from

high grade steel.

• Keeps GS sweep performing

at maximum performance level

99-046122-000

47-861049-009

Replacement O-Ring (5/pkg)

SWEEP RELEASE ASSEMBLY

Complete assembly, including all linkages

and solenoid.

• Easy to change and repair if necessary

47-041794-009 – Tower Up

47-045566-009 – Tower Down

SWEEP ROLLER

Keeps the sweep wagon

operating smoothly.

99-040249-004

SWEEP WAGON FRAME

Built to provide years of service and smooth

operation of the sweep assembly. Broken or

bent frames may cause excess wear to the

plastic rollers or put stress on the sweep

drive motor to operate eﬀectively.

47-045010-002

TECH TIP

Occasionally the sweep on the

GS pinsetter will stay down at

the end of a cycle causing the pin

light to stay on and the pinsetter

not to generate an error code

on the pinsetter electronics.

The problem can be solved by

reducing the excessive swing

of the sweep release assembly,

adjusting the sweep release

tipper position in relationship to

the tipper roller, and adjusting

the forward position of the

sweep.

GUTTER ADAPTER

OEM gutter adapter for sweep board.

Now made of stronger material to last

even longer.

47-041721-002

RETAINING CLIP (15MM)

A must have for the spare parts inventory,

keeps the linkage in place for smooth sweep

operation.

11-051869-000

GS SWEEP FOOT CAP UPGRADE KIT

• Do you have sweep foot caps that fall out

and are missing? You can now upgrade your

sweep foot caps with this handy kit

• Kit includes special size drill bit,

25 fasteners and instructions

47-862011-000

47-044978-004 - Foot Caps

(sold separately)

GS | SWEEP WAGON

www.brunswickbowling.com | 17

GS**

1 47-045010-002 Sweep Wagon (Frame only)

2 47-044927-003 Sweep Board Only (Grey)

for GS-98, GS-X

2 47-044802-009 Sweep Board w/Felt (Brown)

3 47-045082-004 Sweep Board Decal (GS-98)

3 47-045373-004 Sweep Board Decal (GS-X)

4 11-052614-001 Carriage Bolt 6 mm x 40 mm

5 11-052601-001 Carriage Bolt 8 mm x 30 mm

6 47-041721-002 Gutter Adapter

7 11-052035-001 Flat Washer 10mm

8 11-051745-001 Locknut 10mm

9 47-044979-004 Rubber Bumper

10 47-044978-004 Foot Cap

11 11-051744-001 Locknut 8mm

12 99-040249-004 Plastic Roller Assembly

13 47-861010-001 Flat Washer 13mm (Pkg of 20)

14 11-051070-001 Hx Hd. Cap Screw 12mm x 60mm

15 11-051747-001 Locknut 12 mm

16 11-051010-001 Hx Hd. Cap Screw 8mm x 20mm

17 11-052019-001 Flat Washer 8.4mm

18 11-051770-001 Lockwasher 8mm

19 47-041774-004 Bracket

20 47-042056-003 L.H. Pusher Rod

21 11-051869-000 Retaining Ring 15 mm

22 99-010103-004 Plastic Bearing

23 47-861029-001 Flat Washer 16mm (Pkg of 10)

24 11-051852-001 Retaining Ring 17mm

25 47-861011-001 Flat Washer 17mm (Pkg of 10)

26 46-040170-004 Roller

27 47-041526-004 R.H. Pusher Rod

28 11-052034-001 Flat Washer

29 11-051786-001 Cotter Pin

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | SWEEP WAGON

18 | www.brunswickbowling.com

V-BELTS

Provide the important power necessary to run the GS machines. Oﬀers increased

ﬂexibility and reduces heat build-up that extends the life of the belt.

11-053901-000 – 10mm x 6mm x 875mm Distributor Sweep/Motor Drive

11-053902-000 – 10mm x 6mm x 1160mm Setting Table Drive

11-053903-000 – 13mm x 8mm x 1375mm Distributor Sha Drive

11-053904-000 – 10mm x 6mm x 950mm Ball Accelerator – 50 Cycle

11-053905-000 – 10mm x 6mm x 1900mm Elevator Drive

11-053907-000 – 10mm x 6mm x 925mm Ball Accelerator – 60 Cycle

11-053909-000 – 10mm x 6mm x 2560mm Transport Band Drive (110mm Pulley)

11-053910-000 – 10mm x 6mm x 2650mm Transport Band Drive (125mm Pulley)

DRIVE MOTORS

Designed and tested to meet the

most rigorous requirements.

• Available in two diﬀerent voltages

to meet multiple needs

• Setting table and sweep motors include

heavy duty brake for improved reliability

and durability

• OEM design

SWEEP MOTOR

99-076366-000 – 1/4 H.P. 208 VAC

99-076367-000 – 1/4 H.P. 230/380 VAC (Shown)

DISTRIBUTOR MOTOR

99-076362-000 – 1/2 H.P. 208 VAC

99-076363-000 – 1/2 H.P. 230/380 VAC (Shown)

TABLE MOTOR

99-076364-000 – 1/2 H.P. 208 VAC (Shown)

99-076365-000 – 1/2 H.P. 230/380 VAC

GS MOTOR STRAIN RELIEF

Used on both ABT and Siemens Motors

and on all GS Series pinsetters.

11-055080-000

ADVANCED PERFORMANCE

CHAIN GEAR

Based on ﬁeld feedback, this newly

re-designed assembly includes two set

screws to reduce stress on the gear, key,

and sha.

• Compatible with all GS-Series Tower Down

Pinsetter models

• Now standard on production pinsetters

series 687 and above

• Metric Key –11-053503-000 for gear

47-075474-009

GS | DRIVE FRAME ASSEMBLY

PINION SHAFT

Used in the pulley drive assembly to allow

for correct operation of the up and down

movement of the setting table and correct

liing of the sweep assembly at the end of

the pinsetter cycle.

47-071705-004

GEAR ASSEMBLY WITH HUB

Used in conjunction with the pinion sha –

47-071705-004 in the pulley drive assembly

to allow for correct operation of the setting

table and sweep.

• Supplied with hub for ease of replacement

47-071702-003

ADVANCED PERFORMANCE

GS METAL PINION GEAR

Used on all Tower Up pinsetters.

• Heavy-duty Setting Table pinion gear

replaces the OEM plastic gear for

extended life and better performance

47-071449-609

STROKE LIMITER SHOCK ABSORBER

Stroke limiter shock will ensure the setting

table functions correctly all the time.

• Designed with no reservoir

• Strong plunger sha manufactured from

high grade steel

47-861049-009 – Replacement O-Ring (5/pkg)

99-076123-000 – For series 442 and below

99-076120-000 – For series 443 and above

www.brunswickbowling.com | 19

1 11-053503-000 Key 8mm x 7mm x 28mm

2 47-075476-004 Shaft

3 47-085348-003 Bearing Housing

4 11-430051-000 Bearing

5 11-430052-000 Bearing

6 47-075482-002 Guide Beam

7 11-053507-000 Key 8mm x 7mm x 30mm

8 47-071591-004 Sprocket Shaft

9 47-075488-004 5/8" Chain

10 11-051852-001 Retaining Ring 17mm

11 47-011053-004 Sprocket

12 11-600500-000 Master Link (3-Piece)

13 47-070386-004 Counter Weight

14 47-075486-004 Chain

15 11-051856-001 Retaining Ring 25mm

16 47-075474-009 AP - Chain Gear (with set screws)

17 47-075473-003 Switch Support

18 47-243028-004 OOR Switch Tower Down

19 47-085449-003 Support Rod

20 47-085349-003 Tube Guide

21 47-085436-003 R.H. Guide Support Bracket

21 47-085430-003 L.H. Guide Support Bracket

22 11-051070-001 Hx Hd Cap Screw 12mm x 60mm

23 47-075356-003 Crank

24 11-051747-001 Locknut 12mm

25 47-861031-001 Flat Washer 18mm (Pkg of 10)

26 47-075352-004 Pivot Bearing

27 11-051062-001 Hx Hd Cap Screw 12mm x 25mm

28 11-051772-001 Lockwasher 12mm

29 47-861010-001 Flat Washer 13mm (Pkg of 20)

30 47-075357-003 Crank Arm

31 11-054300-001 Cotter Pin 2mm

32 11-053493-000 Key 8mm x 7mm x 45mm

33 47-243028-004 TS-2 Switch

34 47-243028-004 Cherry Switch

(Silver, Consolidated, Nex Gen)

34 47-073534-004 “A” Switch (Red Box)

35 47-243029-004 Magnetic “B”, “C”, “D” Switch

(Silver, Consolidated, Nex Gen)

35 47-072307-004 Reed Switch (Red Box)

36 47-071879-003 Cam

37 47-075188-001 Frame (Fixed B-Switch)

37 47-071876-001 Frame (Adjustable B-Switch)

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | DRIVE FRAME ASSEMBLY

20 | www.brunswickbowling.com

UNIVERSAL RELEASE LEVER

Wider button improves performance by

minimizing release levers slipping oﬀ pin

grippers. Used on all universal pin stations.

47-095154-009 – Complete

47-094782-003 – Button only

SQUARE SPINDLE

Prevent pin station housing and retaining pin

wear with this square spindle complete with

a bushing on each end.

47-094790-009

RETAINING BOW EXTENDER SLEEVE

Minimizes pin station jams.

• No more diving pins in the

4,7,10 positions

• Packaged 6 per pack

47-862931-000

REAR DISTRIBUTOR DRIVE PULLEY

OEM pulley 162 mm for 15 mm polycord belt.

47-024839-002

UNIVERSAL PIN STATION

Redesigned with an improved steel

pin release lever attachment pivot.

• Universal Housing Only – 47-094778-001

• Steel Sha – 47-861045-000 (Pkg of 10)

• Retaining Pins – 47-094789-003

(Improved longer area for pin engagement)

• Retaining Ring – 47-861044-000 (Pkg of 20)

• Plastic Retaining Bow Bushing – 47-861043-

000 (Pkg of 10)

47-094792-009 – 2, 3, 4, 8, 9 pin location

(shown large)

47-094793-009 – 1, 5, 6 pin location (not

shown)

47-094794-009 – 7, 10 pin location (not

shown)

SLIDER ASSEMBLY

Long design improves reliability by centering

pin movement to the pin holder.

• Minimizes distributor jams and table switch

problems

• Manufactured from impact resistant

polyethylene

• Easy to install

47-091284-002 – Complete

47-091277-002 – Mount only

47-095609-002 – Slider only

TWO-PIECE SPUR GEARS AND PULLEY

Prevent pinsetter down situations by keeping

a couple of easy to install two-piece gears and

pulley on hand. These are great temporary

replacements that do not require removal of the

front or rear distributor sha for installation.

Hardware included.

47-275746-009 – Front Distributor Sha Gear

47-274669-004 – Rear Distributor Sha Gear

47-275748-009 – Distributor Round Belt Pulley

To order permanent one-piece replacement gear:

47-090547-004 – Front Distributor Gear

47-093900-003 – Rear Distributor Gear

47-093863-003 – Round Belt Pulley

GS | DISTRIBUTOR

ADVANCED PERFORMANCE

PIN GUIDE/STOP

• Helps minimize pin jams

• Improves accuracy of pin loading from

pin station into pin holder

47-097417-000 – Sold Separately

www.brunswickbowling.com | 21

DISTRIBUTOR

REPAIR KIT INCLUDES

HARDWARE

1 47-092206-004 Shaft

2 11-051018-001 Hex Head Screw 6mm x 20mm

3 11-052037-001 Flat Washer 6.4mm

4 47-094712-003 Bracket

5 11-051743-001 Locknut 6mm

6 47-093587-004 Dowel Pin 3mm x 15mm

7 47-090969-003 Pin Stop

8 47-093760-002 Pin Shield (7)

8 47-091890-002 Pin Shield (2, 3, 8, 9, 10)

8 47-092211-002 Pin Shield (1, 6)

9 47-095609-002 Slider Only

10 11-051515-001 Socket Head Screw 6mm x 18mm

11 11-051520-001 Socket Head Screw 6mm x 20mm

12 47-091277-002 Slider Mount

13 11-052019-001 Flat Washer 8.4mm

14 11-054449-000 Hx Hd. Self-Tapping Screw K70x18mm

15 47-091284-002 Slider Assembly Complete

16 47-092415-003 Pulley with Bearing

17 11-051852-001 Retaining Ring 17mm

18 11-051546-001 Hex Head Screw 5mm x 40mm

19 47-092300-004 Polycord 12mm x 44 meters Lg

19 47-092300-005 Polycord 13mm x 20 meters Lg

20 47-093547-004 Gear

21 11-052039-001 Flat Washer 5.3mm

22 11-051742-001 Locknut 5mm

23 11-051856-001 Retaining Ring 25mm

24 47-861028-001 Shim Washer 25mm x 36mm x 1 mm

25 11-053903-000 V-Belt 13mm x 8mm x 1375mm

26 47-090989-002 Double Pulley

27 47-094353-004 PVC Spacer

28 47-094346-003 Bearing Shell w/ Shoulder

29 11-430013-000 Bearing

30 47-094351-003 Washer

31 47-093863-003 Round Belt Pulley

31 47-275748-009 2-Piece Pulley Repair Kit

32 47-093874-004 Clamp

33 47-094347-003 Bearing Shell

34 47-095050-003 Plastic Bearing

35 47-090547-004 Spur Gear w/ 25mm Collar

35 47-275746-009 Two Piece Gear Kit

36 47-094349-001 Front Shaft Assembly

37 47-275730-009 Distributor Repair Kit

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | DISTRIBUTOR

22 | www.brunswickbowling.com

POLYCORD 12MM

The original OEM distributor belt.

• Minimal stretching for increased life and

performance

• See page 30 for belt weld kits and components

47-275804-009 – 20 meter length

47-092300-004 – 44 meter length

POLYCORD 12.7MM - BLUE

• New belt for use in shark and corner locations

• Welds well

• See page 30 for belt weld kits and components

47-092301-000 – 20 meter length

GS-X SHARK FIN

Made of impact resistant material making

the Shark Fin more durable..

47-095106-001

RUBBER MOUNT

Absorbs vibration between the elevator

and shark assembly while helping to

prevent wear of the assemblies.

11-053579-000

SOLENOID

GS-X original equipment shark

switch solenoid.

99-060387-004

POLYCORD 15MM

Minimize pins in the ball door with more power.

• Made from non-stretch high grade polyurethane

• See page 30 for belt weld kits and components

47-024838-005 – 7 meter length

ROUND BELT GEARED PULLEY

GS-X original equipment shark switch

rear geared pulley assembly.

47-095744-004

SMART SHARK GUIDES

Complete with a radius at the

bed to prevent cracking.

47-095103-001 – LH

47-095104-001 – RH

POLYCORD 13MM

Improve distributor performance with a larger

diameter polycord.

• Improve pin transfer throughout the distributor

• See page 30 for belt weld kits and components

47-092300-005 – 20 meter length

POLYCORD ROUND BELT TRIM TOOL

Makes the trimming process painless.

Simply wrap the tool around the weld

bead, rotate the tool and cut the excess

bead away.

47-860009-000

47-860009-001 – Replacement Blades - Pkg of 2

GS | DISTRIBUTOR

www.brunswickbowling.com | 23

1 47-095108-001 Shark Switch Assembly

2 11-051026-001 Hex Head. Screw 8mm x 40mm

3 11-051770-001 Lock Washer 8mm

4 11-052019-001 Flat Washer 8.4mm

5 47-093925-004 Spacer

6 47-093906-001 R.H. Pin Guide Wedge

7 11-051744-001 Lock Nut 8mm

8 11-052006-001 Washer 8.4mm

9 11-051704-001 Hex Nut 8mm

10 47-095104-001 R.H. Guide

11 11-051010-001 Hex Hd. Cap Screw 8mm x 20mm

12 47-095106-001 Fin Switch

13 11-053579-000 Rubber Mount

14 47-092300-004 Polycord 12mm x 44 Meters Lg

15 11-430007-000 Bearing

16 99-090348-004 Spring

17 47-095111-004 Solenoid Plunger

18 99-060387-004 Solenoid Consolidated/Nex Gen

19 47-095103-001 L.H. Guide

20 47-093929-001 L.H. Pin Guide Wedge

21 11-051081-001 Hex Head. Screw 8mm x 100 mm

22 47-095112-004 Spacer - short

23 47-095109-004 Spacer - long

24 47-095105-003 Slide

25 47-095107-003 Housing

26 47-095744-004 Round Belt Geared Pulley

27 99-090349-004 O-Ring

28 47-095745-004 Round Belt Pulley - Non Geared

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | DISTRIBUTOR

24 | www.brunswickbowling.com

OVERFLOW CHUTE PIN WIPE FOR

METAL CHUTE

Improve pin performance by keeping them

clean with this easy to install, long lasting,

and washable Pin Wipe.

• Cloth ﬁts the metal overﬂow chute used on

GS-X pinsetters

• Packaged one per bag

47-092527-000

OVERFLOW CHUTE ASSEMBLY

WITHOUT SOCK

Prevent disruption in distributor overﬂow.

• Polyethylene design eliminates noise

• Shock mounted for durability

47-095739-009 – LH

47-095740-009 – RH

OEM OVERFLOW SOCK

Improved OEM sock has a locking strap to

keep socks from swinging excessively as

pins exit.

• Help prevent pin and transport band wear

• Oﬀers a reinforced bottom, slowing pin

entrance onto the transport band

47-097509-000

GS | DISTRIBUTOR

ADVANCED PERFORMANCE

OVERFLOW CHUTE PIN WIPE

FOR PLASTIC CHUTE

Improve cleanliness and performance of

pins with this easy to install, long lasting

and washable advanced pin wipe.

• Used on GS machines, series 406 and

above, including GS-X

• Cloth ﬁts the plastic overﬂow chute used

on GS-X pinsetters

• Packaged 2 cloths per bag

47-860003-000

ADVANCED PERFORMANCE

OVERFLOW CHUTE UPGRADE KIT

Reduces stress by using cushioned

mounts to secure the front and rear

of the overﬂow chutes to the mounting

locations of the pinsetter. Must be used

with: L.H. Overﬂow Chute – 47-095738-001

and R.H. Overﬂow Chutes 47-095737-001.

Includes all mounting hardware and

instructions to upgrade older style chutes.

Note: Overﬂow Chutes 47-095739-009 and

47-095740-009 must be replaced with the

overﬂow chute numbers above when using

this upgrade kit.

47-275731-009

GS-X PIN CLEANER KIT MOP COVERS

Improve pin appearance while removing dirt

from your system.

• Contains two mop covers and instructions

• Replacement mop covers for Overﬂow Sock

Pin Cleaner Kit - 47-275812-009

47-860012-000 – Pkg of 2

ADVANCED PERFORMANCE

OVERFLOW SOCK PIN CLEANER KIT

Improve pin appearance with this easy

to install and maintain pin cleaner.

• Mounting plates eliminate need for Velcro®

• Pockets on both sides of mounting

plates allowing cover to be ﬂipped

when one side is dirty

47-275812-009

www.brunswickbowling.com | 25

1 47-095740-009 R.H. Chute Assembly w/out Sock

1 47-095739-009 L.H Chute Assembly w/out Sock

2 47-095738-001 L.H. Plastic Chute - Only

2 47-095737-001 R.H. Plastic Chute - Only

3 47-860003-000 AP - Pin Wipe

4 47-095727-004 Pressure Plate

5 11-051743-001 Locknut 6 mm

6 47-861001-001 R.O. Hex Hd. Cap Screw

5 mm x 25 mm (Pkg of 10)

7 11-052039-001 Flat Washer 5.3 mm

8 11-052938-001 Flat Hd. Screw 8 mm x 12 mm

9 47-095726-004 Mounting Plate

10 11-053588-000 Rubber Bumper 30 mm x 20 mm

11 11-051742-001 Locknut 5 mm

12 47-095728-004 Angle Bracket

13 11-051744-001 Locknut 8 mm

14 11-051038-001 Hex Hd. Cap Screw 8 mm x 16 mm

15 47-093749-004 Bracket

16 11-603301-000 Overflow Chute Clamp

17 47-097509-000 Sock (Black) with Brunswick logo

17 47-092529-600 Sock - Heavy Duty (White)

18 11-053587-000 Rubber Bumper 25 mm x 15mm

19 47-095729-004 Mounting Bracket

20 11-051035-001 Hex Hd. Cap Screw 6 mm x 16 mm

PART INDEX

For complete schematics please refer to the

GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/

tech-support/documentation/parts-catalogs.

GS | DISTRIBUTOR

26 | www.brunswickbowling.com

MOUNT BUSHING

FOR ACCELERATOR MOTOR

Accelerator Motor Mount Bushing for GS

series 419 and below

• Keep your accelerator belt adjusted properly

and motor moving freely by replacing these

bushings

99-010123-004

ACCELERATOR MOTOR-208/230/380

GS-X original equipment accelerator motor.

• Rigorously tested to assure long life

• For series 420 and below, order motor

99-076362-000

99-030363-004

TENSION SPRING (BALL DOOR)

Stretched or weak tension springs can

cause ball calls at the ball door. Replace this

spring with new for optimal operation.

47-034767-004

EJOT-PLASTIC NUTS 3.5

Keep your ball door protector plate tight

with these nut plates.

• Replace loose, stripped or broken nut

plates with new nuts to keep your Ball Door

Protect Plate from failing prematurely

11-055800-000

PROTECTOR WEDGE

Upper Ball Door Protector Wedges.

• Missing or broken protector wedges can

cause ball, pin and ball door assembly

damage

• Check and replace when worn

47-021620-002 – 7 pin side (L.H.)

47-021619-002 – 10 pin side (R.H.)

PROTECTIVE COVER

Used to protect the ball rods of the

accelerator.

• Defective or broken protective covers can

lead to scratching bowling balls

• Allows for smooth transition from the ball

accelerator to the return track

• Pack of 4

47-862787-000

BALL DOOR SOLENOID

Original equipment Ball Door Solenoid.

• Powerful solenoid made from high grade iron

• Designed to activate ball door mechanism

under the highest load

• Designed housing minimizes malfunction

due to dirty/oily environmental conditions

• Also used in GS Drive Frame Assembly and

Sweep Release Assembly

99-070356-004

ACCELERATOR NON-SLIP PLATE

Provides a secure surface for walking and

climbing on top of accelerator. Can be

installed on any GS pinsetter.

47-862932-000

ACCELERATOR FLAT BELT

Minimizes stretching to ensure long life.

10-635127-000

PROTECTOR PLATES

Protects the ball doors from direct

impact from pins and bowling balls.

47-035240-001 – L.H. 10 Pin Side (Shown)

47-035241-001 – R.H. 7 Pin Side

GS | BALL ACCELERATOR

www.brunswickbowling.com | 27

1 47-862932-000 Accelerator Non-Slip Plate

2 11-054466-000 Plastic Fastener Screw

3 47-035240-001 Protector Plate, 10 pin side

3 47-035241-001 Protector Plate, 7 pin side

4 47-031796-002 Holder

5 99-060219-004 Solenoid Assembly

6 47-031797-002 Locking Bolt

7 47-033558-009 RH Locking Mechanism Complete

7 47-033557-009 LH Locking Mechanism Complete

8 47-031822-004 Lever

9 47-030276-004 Ball Door Arm Tension Spring

10 47-031058-001 Arm (use for RH and LH)

11 47-031056-003 LH Ball Door Key

11 47-031055-003 RH Ball Door Key

12 47-031054-002 Ball Door (use for RH and LH)

13 47-033556-009 RH Ball Door with Arm

13 47-033555-009 LH Ball Door with Arm

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | BALL ACCELERATOR

28 | www.brunswickbowling.com

TRANSFORMER ASSEMBLY - SINGLE

Insure you have the correct power for critical

electronic functions of the GS-X pinsetter.

• Direct replacement for GS-X Nex Gen Boxes

equipped with a single transformer

47-142659-000

EMERGENCY STOP CONTACTOR

Used in conjunction with the emergency

stop switches on the pinsetter, this will kill

power to both pinsetters. This is a must

have for your spare parts inventory for the

GS-X pinsetter.

47-142712-000

TRANSFORMER ASSEMBLY - DOUBLE

Direct replacement for GS-X

Nex Gen boxes equipped

with two transformers.

47-142692-000

TECH TIP

If you are unable to scroll through the diﬀerent

modes on the keypad of the Nex Gen box,

check the reset button on the Frameworx ball

rack. The reset button may be stuck in the

“pushed in” position and needs to reset to the

normal position.

EMERGENCY STOP UPGRADE KIT

Safety is the number one priority while

working on or around pinsetters. This kit will

add emergency stop switches and motor

contactor functions to older GS-X pinsetters.

• Includes complete instructions and all parts

needed to upgrade one pair of pinsetters

47-862867-000

ADVANCED PERFORMANCE

REAR DISPLAY PACKAGE FOR

GS CONSOLIDATED ELECTRONICS

PINSETTERS GS-98

This was designed to allow the functions of

the consolidated box to be located at the

rear of the pinsetter. Comes complete with

all mounting hardware and rear display for

easy mounting to the elevator.

47-861046-000

LCD NEX GEN PACKAGE

Direct replacement for the LCD display of

the Nex Gen box. Includes wiring harness.

47-862100-000

LED LIGHT FIXTURE

Fixture ONLY. Brackets or hardware not

included.

47-863001-000

GS | ELECTRICAL BOX

ADVANCED PERFORMANCE

NEX GEN REAR DISPLAY PACKAGE

FOR GS-X

Very useful upgrade for customers to allow all

functions of the Nex Gen box to be performed from

the rear of the pinsetter. Mounts to the elevator of

the pinsetter, mounting hardware included. Perfect

for centers where the soﬃt wall interferes with

direct access to the Nex Gen Box mounted at the

front of the pinsetter.

47-861048-403

11-616034-000 – Replacement Toggle Switch

47-862877-403 – Nex Gen Firmware (v4.97.02)

NOTE: 2002-2003 CPU board upgrade needed

when purchasing new Nex Gen Rear Display. Order

47-142736-820.

GS-X FUSES

Make sure you have the correct amp fuses at all

times. This is a must have for your spare parts

inventory.

• Using the incorrect fuse may lead to CPU

or High voltage PCB failures

• All fuses come 5 per package

3.15 Amp Fuse – 47-862854-000

Used to protect the output functions of the

CPU PCB.

8 Amp – Ceramic Fuse – 47-862855-000

Used on the High Voltage PCB, these fuses

protect the clockwise and counter clockwise

directional phases of the table motor for a pair

of pinsetters.

.5 AMP – Slow Blow Fuse – 47-862856-000

Used on the High Voltage PCB to protect the pin

light circuitry.

www.brunswickbowling.com | 29

1 47-862866-404 Nex Gen Controller Assembly

2 47-862857-000 Keyboard Membrane

3 11-615511-000 ON/OFF Toggle Switch w/Nut

4 47-142594-000 Switch Guard

5 47-142664-000 LH Pin Light Power Cable

6 47-142660-000 Black Power Switch/Cable

(single transformer Nex Gen)

7 47-142663-000 AC Power In Cable Assembly

8 47-142659-000 Harness Transformer Assembly

8 47-142692-000 Transformer/Harness - Double

(Dual Transformer Nex Gen)

9 47-142657-000 LH Harness Deck Power

Motor Assmbly

10 47-142661-000 LH Harness Sweep Motor

Power Assembly

11 47-142657-010 RH Harness Deck Power

Motor Assmbly

12 47-142661-010 RH Harness Sweep Motor

Power Assembly

13 47-142664-010 RH Pin Light Power Cable

14 47-142736-404 CPU PCB Nex Gen Controller

15 47-862854-000 Fuse 3.15A, 250V (Pkg of 5)

16 47-862855-000 Fuse 8A 250V, Fast Blow (Pkg of 5)

17 47-862856-000 Fuse .5A, 250V, Slow Blow (Pkg of 5)

18 47-142700-000 CPU to High Voltage Logic

Cable Assembly 14"

19 47-862859-000 High Voltage PCB Nex Gen Controller

20 47-142693-000 Transformer to CPU Cable

21 47-862863-000 I/O PCB Assembly

22 11-615048-000 Lockout Power Switch - Red

PART INDEX

For complete schematics please refer to the GS Pinsetter Service Parts Catalog – 47-902712-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

GS | ELECTRICAL BOX

30 | www.brunswickbowling.com

GS | TOOLS AND MAINTENANCE

GAUGE BLOCK

Perform GS adjustments with this easy to

use all-in-one tool. Use for pin detector,

setting table lowest position, setting

table highest position, transport band

tension spring, pin count switch, shovel

guide, distributor guide wedge to elevator

adjustments and more.

47-900012-000

METRIC TOOL KIT

All the metric tools needed to maintain the

GS pinsetter.

47-273865-009

SPUD WRENCH

This tool combines 13mm and 17mm twelve

point sockets in one tool. Use one tool for

GS pinsetter maintenance.

47-900011-000

POLYCORD ROUND BELT TRIM TOOL

Makes the trimming process painless.

Simply wrap the tool around the weld

bead, rotate the tool and cut the excess

bead away leaving a smooth surface.

47-860009-000

47-860009-001 – Replacement Blades - Pkg of 2

ELEVATOR CHAIN REPAIR KIT

Repairs stretched chains which cause elevator

jams. Kit contains tool and master link with pin.

• 47-013871-004 Master link with pin only

• 47-013872-004 Elevator chain break tool only

47-013873-004

GS PINSETTER TOUCH-UP PAINT

Lacquer based paint which comes with

a “fan” type nozzle for better coverage.

47-860021-000 – 12 oz. (Grey)

BELT WELDING INSTALLATION TOOL

Makes it easy to properly tension belts

while in place on the pinsetter. Instructions

included.

47-860001-000

URETHANE (NO-BOUNCE) MALLET

No-bounce urethane head drastically

reduces rebound that can damage parts

or cause personal injury. Contoured handle

provides a ﬁrm, nonslip grip.

90-750069-000

BELT WELD KITS , IRONS AND ACCESSORIES

This kit contains all the items needed to repair poly

cord belts.

• Adjustable thermostat to keep iron calibrated at

optimal temperature

• Kits contain belt welding iron, belt welding clamp,

and belt cutter. Also available separately:

47-862770-000 Belt Welding Clamp

47-277134-009 Belt Welding Kit 115V 50/60Hz

47-277135-009 Belt Welding Kit 230V 50/60Hz

47-097132-000 Belt Welding Iron - 115V 50/60Hz

47-097133-000 Belt Welding Iron - 230V 50/60Hz

47-097136-000 Teﬂon Heat Plt, PQ-18 Belt Welder

47-093876-004 Belt Cutter

www.brunswickbowling.com | 31

NON-LITHIUM GREASE - 14.5 OZ.

Recommended grease for GS pinsetters.

• Lubricate parts appropriately

• For use on non-metal parts

11-676361-000

GS ELECTRICAL TOOL KIT

This kit contains all the special tools

required to remove and replace all the

cable terminals associated with the

GS-X pinsetter. Includes: Molex® extractor,

Molex Crimper, Miller Cutter/Stripper,

Round Extractor, Digital Multi-meter, Molex

Terminals, Female Mini Fit Terminals, Pin

Terminals, and other extraction tools.

47-862804-000

TERMINAL-37 PIN ON SETTING TABLE

11-615101-000 – Male

GS PREVENTATIVE MAINTENANCE

WALL CHART

Reusable 24" x 36" chart shows Brunswick’s

recommended preventative maintenance

schedule for daily, weekly, monthly,

quarterly, bi-yearly, and yearly items.

• Allows for recording of progress using

water-soluble markers.

• Marks wipe oﬀ easily using a damp cloth.

47-902401-000

CABLE TERMINAL TOOLS

Required tools for repairing

GS pinsetter cable connectors.

57-900102-000 – Molex round extractor

57-900103-000 – Molex Crimper

57-900108-000 – Miller Cutter/Stripper

NYOGEL 788 LUBRICANT

Prevent damage to plastic parts by using

the correct type of lubricants.

• Used to lubricate pin station pivot points in

the distributor area or anywhere plastic part

pivot points need lubrication

• Also used in old style pin ball wizard motors

with plastic internal gearing

11-676308-000

BALLAST

For 230 volt Pinlight.

47-226294-004 – OEM Replacement

CHAIN LUBE

Keep chains lubricated and rust free

G34-205116-000

GS | TOOLS AND MAINTENANCE

32 | www.brunswickbowling.com

NON PINSETTER PARTS

www.brunswickbowling.com | 33

NON PINSETTER PARTS

34 | www.brunswickbowling.com

URETHANE FOAM BALL LIFT TIRE

Durability! Aer more than 1.5 million

ball impacts, there is virtually no wear.

This tire is made of a specially formulated

foam material manufactured to the proper

density to optimize ball li performance.

• Tire is now designed with a smaller diameter

for better performance

• Made with same technology used to

manufacture Reactive resin bowling balls

Tip: For the best liing results with highly

reactive balls, install a urethane li wheel

in the bottom position and a rubber hub and

tire ball li wheel – 53-520060-000 in the

top position.

90-520060-600 – Tire only

BALL LIFT WHEEL ASSEMBLY

Original power li wheel can be counted

on for years of positive ball liing.

• For Frameworx metric ball lis, order

hardware – 11-051038-001 (Pkg of 10)

• Hex Head Cap Screw – 11-001258-001 (Pkg of 25)

53-520060-000

TECH TIP

Power li tires and tracks

should be inspected yearly for

worn/ﬂat spots on the lower

C tracks, swelling from oil

soaking of the C tracks, and

cracking of the hub and tire

assembly. This is a good time

to also verify the alignment

of the drive belt and remove,

clean, inspect, and lubricate the

li motor.

URETHANE BALL LIFT V-TIRE

Prevent balls from getting stuck in the li,

by keeping urethane ball li wheels in top

condition.

• Red/orange V-shaped urethane wheels are a

continuous one piece urethane part, eliminating

separation problems

• Long lasting

• For Frameworx metric ball lis, also order 8mm

x 30mm Hex Head Bolt – 11-051044-001

90-520060-000

POLY V-BELT

Poly V-belts oﬀer increased ﬂexibility and

reduced heat build up, extending belt life.

• They are ideal for operating at higher speeds

on small pulleys

• They provide enough drive power to li two

or three balls at a time

• Recommended to use with Power Ball Lis

• To convert from a ﬂat belt or V-belt to a Poly

V-Belt, order Brunswick’s handy conversion

kit – 53-860431-000

53-520235-000

ADVANCED PERFORMANCE

HIGH FRICTION POLY V-POWER LIFT BELT

This power li belt provides more power

transmission to li all types of bowling balls

• The high friction “backside” works eﬃciently with

idler pulleys to provide consistent and reliable

performance

53-520235-600

BALL LIFT ASSEMBLY

www.brunswickbowling.com | 35

RUBBER AND LEATHER

POWER LIFT TRACK

Flexible rubber li track ﬁts the steel

contours better than some molded urethane

tracks do, providing excellent ball li.

• High-grade, bolt-on leather strips protect

rubber without tearing or marking balls

• Make these tracks last a lifetime by

periodically replacing the leather and

retouching the glue that adheres the rubber

to the steel

53-520171-000 – Rubber for B2000

53-520172-000 – Leather for B2000 or FX

53-520686-000 – Rubber for FX

53-520040-000 – Rubber for concealed

power li assembly

SANTOPRENE BALL LIFT TRACK

One-piece santoprene track is injection

molded to ensure proper ﬁt with the

steel track.

• Red/orange material will not mark balls

• Resists oil and wear. (For B2000)

Tip: Extend life of a santoprene track by

bolting a leather track (53-520172-000)

on top of it. Short of replacement, it

is possible to swap the right and le

santoprene li tracks to move the worn

area from the critical transition spot to

the less critical top exit area.

90-520171-000

BALL LIFT ASSEMBLY

ADVANCED PERFORMANCE

URETHANE FOAM BALL LIFT TRACK

Urethane grommets strengthen the

mounting holes to prevent tearing.

• Outlasts the standard OEM rubber and

leather li tracks

• Will not absorb lane oils and swell like

conventional li tracks

• Package of 2 each (For B2000)

90-520171-600

BALL LIFT TRACK ASSEMBLY -

FRAMEWORX

Completely assembled and ready to install.

Assembly consists of metal track, rubber

track, leather track, washers, and screws.

Installation hardware sold separately.

53-520678-000 – R.H.

53-520679-000 – L.H.

ADVANCED PERFORMANCE

FRAMEWORX BALL LIFT TRACK

Used on Frameworx Ball Lis, this

one piece, urethane ball li track

provides durability, ball protection,

and maximum oil resistance.

• Independent lab tests show little

wear aer one million balls

• Sold in pairs (1 Right Hand and 1 Le Hand)

90-520172-600

36 | www.brunswickbowling.com

POWER LIFT CLUTCH

Fully assembled with a special, heat-treated hex

head cap screw that will not shear under repeated

ball impact.

• Extend the life of the power li wheels by keeping

this clutch in shape

• Based on a replaceable, high-performance

Torrington clutch - bearing assembly – 11-500552-000

53-860555-000

POWER LIFT DRIVE SHAFT

Prevent worn shas that cause ball to stick

in the power li.

• Made from a solid piece of stress-proof steel

53-520066-000

1/3 HP, 1150/950 RPM

POWER LIFT MOTOR

For higher voltage centers, this universal

voltage motor will hold strong.

• For B-2000 and before

• 1150/950 RPM

• 110/220/115/230 Volt – 60/50 cycles

• 1/3 horsepower

• 5/8" sha

• Continuous Duty

• Push button thermal overload reset

• Made for 56YZ frame

53-529999-000

B/L MOTOR-1/4HP

1150/960RPM-5/8 SHAFT

Choose a motor that has enough power to

li balls up the track and uses less energy.

• For B2000 ball lis only

• 1150/960 RPM

• 110/220/115/230 – 60/50 cycles

• 1/4 horsepower

• 5/8" sha

• Made for 56 frame

• Usable at 208

• Push button thermal overload reset

53-860322-010

1/4 HP, 1425/1725 RPM

POWER LIFT MOTOR

Motor for Frameworx lis only.

• 1425/1725 RPM

• 110/220/115/230 Volt – 50/60 cycles

• 1/4 horsepower

• 5/8" sha

• Continuous duty

• Push button thermal overload reset

• Made for 48Z frame

53-860328-000

BALL LIFT ASSEMBLY

www.brunswickbowling.com | 37

ADVANCED PERFORMANCE

URETHANE TRANSITION TRACKS

Prevent bowling balls from failing to roll out of ball

li onto rack by replacing rubber transition tracks.

• Designed to be wear resistant to today’s abrasive

balls and will last 2 to 1 over OEM rubber track

90-520075-600

POWER LIFT IDLER PULLEY

ASSEMBLY

Eliminate belt tensioning problems

by replacing worn and broken pulleys.

• Solid steel pulleys come fully

assembled with a replaceable bearing

– 11-430028-000 and a retaining ring

53-520244-000 – For poly V-belt

53-520026-000 – For V-belt

LOWER PULLEY ASSEMBLY

When replacing a power li clutch, also

replace the race assembly for longer service.

53-520663-001

BALL TRANSITION ASSEMBLY

Transitions ball from power li to ball rack

smoothly.

• Worn transition tracks can cause balls to

hang up in the exit of the power li and

cause rough transitions to the ball rack

• Made for Power Li

53-520073-000

BALL LIFT WELDMENT ASSEMBLY

(METRIC)

Replacement frame for Frameworx ball li.

Includes metric hardware.

• Having a spare on hand helps avoid

unnecessary down time

53-520696-001

INTELLISHIELD BALL RETURN GUARDING SYSTEM

• Automatically shuts oﬀ ball li if a foreign object enters opening or if the ball rack is full

• Prevents injury to hands and ﬁngers

• Automatically timed restart once obstruction is cleared

• Compatible with the Frameworx® ball li hood

• For use with 8.5” balls

• Easy installation

• Integrates with SYNC™ Scoring and Management System

• Works independently of other scoring systems

53-861674-000

BALL LIFT ASSEMBLY

38 | www.brunswickbowling.com

BALL RAIL EXTRUSIONS PACKAGE

Includes two Ball Rail Extrusions and screws.

53-861026-227 – Black

53-861026-229 – Graphite

BALL RAIL EXTRUSION - SINGLE

Includes Ball Rail Extrusion and screws.

53-400049-227 – Black

53-400049-229 – Graphite

BALL RETURN COLOR KITS

WITH "B" LOGO

Includes:

(2) 53-400079-XXX - Ball Rail Extrusions

(1) 53-400043-XXX - Vent Decal

(2) 53-400057-XXX - Wear Strip

(1) 53-400009-XXX - Throat insert

(1) 53-400048-XXX - B Logo

53-861090-227 – Black

53-861090-229 – Graphite

BALL RETURN COLOR KITS

WITHOUT "B" LOGO

Includes:

(2) 53-400079-XXX - Ball Rail Extrusions

(1) 53-400043-XXX - Vent Decal

(2) 53-400057-XXX - Wear Strip

(1) 53-400009-XXX - Throat insert

53-861122-205 – Black

53-861122-002 – Graphite

REPLACEMENT LOGO "BRUNSWICK"

53-400092-000

WEAR STRIP

Sold individually

53-400057-227 – Black

53-400057-229 – Graphite

RESET BUTTON

Gold Crown and AstroLine Ball Rack

Reset Button.

11-615014-000

HAND DRYERS - BALL RETURN

Replace worn or damaged motors.

Keep bowlers grip tight on the ball.

53-861077-000 - Conversion Pkg - 24V to 115V

53-861059-115 - Pkg 115V Hand Dryer Fan

53-861059-230 - Pkg 230V Hand Dryer Fan

FRAMEWORX BALL HOOD THROAT

Complete with hardware

53-861126-000 – Dark gray

53-861126-003 – Graphite

53-861126-205 – Black

FRAMEWORX BALL RACK

SAFETY SWITCH

Turns oﬀ ball li when lever is pushed.

• Help prevent injuries to anyone who may

put their hands in the li

• For Frameworx and B2000 lis.

Must use in the upper wheel position

Ball Li Wheel – 53-520060-000 or

Urethane Foam Tire – 90-520060-600 Not

compatible with V-style wheel or U-style

wheel in upper position

53-861149-000 – Complete Assembly

53-860458-000 – Replacement Switch

FRAMEWORX BALL RETURN

STORAGE RACK

Rack is made from rugged, all steel

construction that will not damage balls.

• Racks are available in 6-ball or 8-ball

additions

• This product is perfectly integrated to the

best-selling Frameworx® ball return, and

other Frameworx ball rack look-alikes

• Easy to install

• Includes hardware and instructions

53-861147-606 – 6 ball, dark gray

53-861147-608 – 8 ball, dark gray

53-861133-606 – 6 ball, silver

53-861133-608 – 8 ball, silver

11-651103-000 – Rubber replacement for

ball rack tips

BALL RETURN SAFETY DECALS

53-400067-000 – Ball Rack Hand Warning

53-400487-000 – No Hands in Ball Return

53-400494-000 – Max 12 - Number of Balls in Rack

RESET SWITCH AND BRACKET

ASSEMBLY FOR FRAMEWORX

BALL RACK

• Replacement for damaged or worn

out switches

• Includes switch and bracket

53-861127-000 – Dark Gray

53-861127-100 – Silver

53-861127-205 – Black

BALL RETURN AND RACK

www.brunswickbowling.com | 39

TECH TIP

Blow oﬀ your customers and save

money at the same time! Every six

months vacuum the intake guard

on the hand dryer motor. Over time,

the guard will collect dust, hair,

and dirt. This collection causes a

decrease in airﬂow which reduces

the eﬀectiveness of the blower for

the customer. The accumulation can

also cause premature failure of the

motor or the motor bearings. It is a

good idea to completely remove and

disassemble the blower yearly for a

thorough cleaning and lubrication.

1 53-400009-227 Throat Decorative Insert

(Dark Gray w/Silver Logo)

1 53-400009-229 Throat Decorative Insert

(Graphite w/Silver Logo)

1 53-400027-002 Throat Decorative Insert

(Black w/Black Logo)

2 53-861126-000 Pkg. Throat (Dark Gray)

2 53-861126-003 Pkg. Throat (Graphite)

2 53-861126-205 Pkg. Throat (Black)

3 53-400044-000 Hood Lip Trim

4 53-860937-000 Ball Return Hood Assembly

(w/ No. 3) - Light Gray

4 53-861034-002 Ball Return Hood Assembly

(w/ No. 3, 5 and adhesive)-Silver

4 53-861034-205 Ball Return Hood Assembly

(w/ No. 3, 5 and adhesive)-Black

5 53-860648-000 Brunswick Side Plate Logo

6 53-520723-000 Ball Lift Hood Retainer Clips

7 53-400048-227 Side B Logo Assembly - Black

7 53-400048-229 Side B Logo Assembly - Graphite

8 53-400057-XXX* Wear Strip

9 53-400097-000 L.H. Exit Track Only (Lt Gray)

9 53-400097-003 L.H. Exit Track Only (Graphite)

9 53-400097-205 L.H. Exit Track Only (Black)

10 53-400099-000 R.H. Exit Track Only (Lt Gray)

10 53-400099-003 R.H. Exit Track Only (Graphite)

10 53-400099-205 R.H. Exit Track Only (Black)

11 53-861127-205 Reset Switch (Black)

11 53-861127-000 Reset Switch (Dark Gray)

11 53-861127-100 Reset Switch (Silver)

12 53-400271-000 End Cap - Lower (Light Gray)

12 53-400271-003 End Cap - Lower (Graphite)

12 53-400271-205 End Cap - Lower (Black)

13 53-400043-XXX* Decal Vent

14 53-400278-000 Vent - Ball Rack (Dark Gray)

14 53-400278-003 Vent - Ball Rack (Graphite)

14 53-400278-205 Vent - Ball Rack (Black)

15 53-400270-000 Ball Return End Cap - Top (Lt Grey)

15 53-400270-003 Ball Return End Cap - Top (Graphite)

15 53-400270-205 Ball Return End Cap - Top (Black)

16 53-861026-XXX* Ball Rail Extrusion

17 53-400041-000 Hand Dryer Hose - Frameworx

17 53-100415-010 Hand Dryer Hose - 2000 Twin Line

18 53-400092-000 Side Logo "Brunswick"

PART INDEX

* See Bowling Service Parts Catalog (P/N 28-201739-000) for color options.

For complete schematics please refer to the Bowling Service Parts Catalog – 28-201739-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

BALL RETURN AND RACK

40 | www.brunswickbowling.com

FRAMEWORX SEATS

Give your Frameworx seating new molded

seats or new color kits. New Graphite color

kits now available.

• Light Gray Seat Only – 53-860959-000

• Graphite II Seat Only – 53-860959-004

53-860960-XXX* – Seat color kit only

(* = See color chart to the right)

53-860395-000 – 45º Swivel

FRAMEWORX PANEL FASTENERS

53-861010-XXX* (Pkg of 10)

(* = See color chart to the le)

FRAMEWORX TOUCH-UP PAINT

Keep furniture weldments looking new.

Dark grey paint.

53-861005-101

Part No.

Suffix

Primary Color

003 Graphite

205 Black

260 Violet

261 Daﬀodil

262 Blaze Orange

263 Malachite

265 Jade

266 Navy

267 Eggplant

268 Silver - non metallic

* Frameworx Color Kit Chart

ACCENT DECALS - OVERHEADS

57-860935-227 – Black

57-860935-229 – Silver

STRIKING LINE CHAIR GLIDES

For Striking Line wood stools.

54-861080-000 – (Pkg of 4)

DRINK HOLDERS

54-100260-000

STRIKING LINE SEAT BUCKET

COMPLETE WITH MOUNTING HARDWARE

Seat Bucket

Style Part Number Dark Cherry Natural

Black

(custom only)

Quantity

Per Package

001 002 003

Easton 54861106XXX

X X X 2

Montgomery 54861107XXX

X X 2

Broderick 54861108XXX

X X 2

Wayland 54861109XXX

X X 2

Alden 54861110XXX

X X 2

STRIKING LINE

WOOD SEAT BOTTOMS

Refreshes Striking Line seating to look like new.

• Easily installs with existing

chair hardware

STYLE “A”

Florence, Contessa, Catalina, Voltair

54-860511-001 – Dark Cherry (Pkg of 4)

54-860511-002 – Natural (Pkg of 4)

STYLE “B”

Easton, Montgomery, Broderick, Alden

54-860512-001 – Dark Cherry (Pkg of 2)

54-860512-002 – Natural (Pkg of 2)

STYLE “C”

Wayland

54-860513-001 – Dark Cherry (Pkg of 2)

54-860513-002 – Natural (Pkg of 2)

FURNITURE

www.brunswickbowling.com | 41

SEAT COLOR KIT

1 53-860959-000 Contour Seat Pkg. (Lt Gray)

1 53-860959-004 Contour Seat Pkg. (Graphite)

2 53-400165-000 Adapter Plate (Dark Gray)

2 53-400165-100 Adapter Plate (Silver)

3 11-051702-001 Hex Nut (6 mm)

4 53-860395-000 45° Seat Swivel

5 11-052037-001 Flat Washer

6 11-051769-001 Lock washer

7 11-054803-001 Socket Hd. Cap Screw

8 11-082862-001 Self Tapping Screw (#14-10 x 1”)

9 53-861066-000 Seat Back Cap (Dark Gray)

10 53-400103-XXX* Front Decal

11 53-861010-XXX* Plastic Fastener (Pkg. of 10)

12 Use index No. 15 Front Insert – Not sold sep.

13 Use index No. 15 Rear Insert – Not sold sep.

14 53-400111-XXX* Rear Decal

15 53-860960-XXX* Color Seat Kit

(This package contains one each of item no.:

10, 12, 13 and 14 and six plastic fasteners)

PART INDEX

* See Bowling Service Parts Catalog (P/N 28-201739-000) for color options.

For complete schematics please refer to the Bowling Service Parts Catalog – 28-201739-000.

Visit brunswickbowling.com/service-support/tech-support/documentation/parts-catalogs.

FURNITURE

42 | www.brunswickbowling.com

DUAL PEDESTAL

NON-PIVOT FOR VECTOR

57-866867-000 – Dark Gray

57-866867-100 – Silver

SENSOR ASSEMBLY

Sensor for infrared Tel-E-Foul.

53-600181-003

TACTILE SWITCH KEYBOARDS

Replacement for automatic scorer

membrane keyboards.

• Provides a click-free contact when touched

• Easier activation and increased durability

means longer product life

57-860607-002 – Black Keys

57-860608-002 – White Keys

RESET BUTTON KIT

Locks out reset button when machine starts

to cycle until zero degree switch is made and

will score immediately if the reset button

(up front, aer a ball detect) is pushed.

57-860109-000

TEL-E-FOUL SYSTEM

Infrared technology.

• Operates on 110/220 VAC at 50/60 Hz

• Requires additional

transformer for installation:

115 volt – 53-860628-115

230 volt – 53-860629-230

• Self diagnostics for easy adjustment

and no interruptions in league play

• All modular design makes it easy to

troubleshoot and change parts

• Board is spring mounted to limit vibration

which can damage electronics

• Compatible with all scoring systems

• Tel-E-Foul PCB - 53-600181-005

53-861076-000

TEL-E-FOUL COVERS

Tel-E-Foul lenses are secured to cover with

hardware. Eliminates lenses popping out

and getting damaged from lane machines

and bowlers. Lens set – 84-860770-000

includes a template to fasten lens to older

style Frameworx Tel-E-Foul Covers.

84-860602-000 – Division Cover

84-860769-000 – Return Cover with lenses

84-860770-000 – Lens Set RH and LH

BALL DETECT - SINGLE

Package is complete with sensor, nuts,

bezel, screwdriver and instructions.

57-863670-000

FRAMEWORX CONSOLE

FLASH DRIVE KIT

Replace your Frameworx hard drives with this

solid state replacement kit.

• No moving parts

• Eliminates hard drive down time

• Pre-programmed with Frameworx soware 6.3

• Comes with cable, mounting hardware, and

complete instructions

57-863397-400

MANAGERS CONTROL PANEL

ROCKER SWITCH

Used at the front desk.

12-750410-000

ELECTRICAL AND SCORING COMPONENTS

DUAL OUTPUT BALL DETECTOR

REPLACEMENT PARTS

Dual output used for scoring and electronic

triggering. Larger reﬂector gives more

surface area for infrared beam then the

older small ones.

57-860507-000 – Reﬂector with bracket

53-600176-000 – Reﬂector only

www.brunswickbowling.com | 43

LED LIGHT FIXTURE GS, GS-X

AND STRING PIN 208/230/380V

• Does not include brackets or hardware

• Not for use with A•2’s, or for systems that

use cameras for scoring

47-863001-000

GOLD CROWN ASTROLINE ASTRO II SYSTEM 2000 FRAMEWORX

MASKING UNIT

Starlights N/A 11675513002 #90 11675517002 #94 N/A N/A

Strikelight 11675501000 28V #308 11675517002 #94 Clear 11675513002 #90 Clear 11675521002 #1692 N/A

11675523000 AMF #68 N/A

1st and 2nd Ball Light 11675501000 28V #308 11675521002 #1692 11675521002 #1692 11675582000 #624 11675582000 #624

11675523000 AMF #68 11675523000 AMF #68

TEL-E-SCORE

Projection 17213927000  150 Watt 17213927000  150 WATT 17213927000  150 WATT 17213927000  150 WATT N/A

Table Light N/A N/A N/A N/A N/A

TEL-E-FOUL

Foul Indicator N/A 11675513002 #90 Clear 11675513002 #90 Clear 11675513002 #90 Clear 11675513002 #90 Clear

Light Source 15609567000  6 Volt 11675514002 #1876 11675514002 #1876 11675514002 #1876 11675514002 #1876

PINFINDER

Display 11675503000 #1252 N/A N/A N/A N/A

AUTOMATIC SCORER

Service Light N/A N/A N/A 11675503000  #1252 N/A

Scanner N/A N/A N/A N/A N/A

Ball Detector 11675514002 #1876 11675514002 #1876 N/A N/A N/A

LIGHT BULBS

“DO NOT CROSS FOUL LINE”

SAFETY DECAL

Designed with large text and red

background to catch bowlers’ attention.

• Installs on return Tel-E-Foul unit for

easy visibility

• Self adhesive, water resistant material

• Package of ﬁve

84-860902-000

PIN LAMP HOLDER

This kit oﬀers easy installation in the

existing opening on both U.S. and Japanese

pinsetter versions.

12-860770-000

DUAL PIN LIGHT FIXTURE

Light Fixture without bulb (GS 208V)

47-225722-004

PIN LIGHT FIXTURE - STANDARD

Light Fixture without bulb (GS 230/380V)

47-225723-004

DUAL PIN LAMP COMPONENTS

11-615519-000 - Toggle Switch

12-860109-000 - A•2 Ballast Only: (115 Volt)

FOUL LINE DECAL (PKG OF 6)

This USBC approved decal is easy and quick

to install. Made with Guardian, the decal

provides great glow under black lights.

84-860266-000 – English

84-860269-000 – Spanish

LED PINDECK LIGHT

SPARE PARTS KIT

Keep your LED Pindeck Lights looking good with this

LED spare parts kit. Have everything you need at your

ﬁngertips, and save money too. Kit consists of one

each of the following:

• 47-863013-000 - Pkg-Led Pindeck Repl Panels (3)

• 47-863014-000 - Pkg-Power Supply-OS-8080

• 47-863015-000 - Pkg-Main Control PCB Brd - OS-8080

Component parts also sold separately.

47-863016-000

ELECTRICAL AND SCORING COMPONENTS

44 | www.brunswickbowling.com

HARDWARE

www.brunswickbowling.com | 45

HARDWARE

46 | www.brunswickbowling.com

11-001178-001

1/4-20 x 1/2

Pkg. Qty. 25

11-001180-001

1/4-20 x 5/8

Pkg. Qty. 25

11-001182-001

1/4-20 x 3/4

Pkg. Qty. 25

11-001183-001

1/4-20 x 7/8

Pkg. Qty. 25

11-001184-001

1/4-20 x 1

Pkg. Qty. 25

11-001186-001

1/4-20 x 1-1/4

Pkg. Qty. 25

11-001188-001

1/4-20 x 1-1/2

Pkg. Qty. 25

11-001190-001

1/4-20 x 1-3/4

Pkg. Qty. 25

11-001192-001

1/4-20 x 2

Pkg. Qty. 25

11-001193-001

1/4-20 x 2-1/4

Pkg. Qty. 15

11-001194-001

1/4-20 x 2-1/2

Pkg. Qty. 25

11-001195-001

1/4-20 x 2-3/4

Pkg. Qty. 10

11-001196-001

1/4-20 x 3

Pkg. Qty. 25

1/4-20 GRADE 2

HEX HEAD CAP SCREWS

Hardware illustrations are actual size.

www.brunswickbowling.com | 47

11-002008-001

1/4-20 x 2

Pkg. Qty. 25

11-002006-001

1/4-20 x 1-1/2

Pkg. Qty. 25

11-002005-001

1/4-20 x 1-1/4

Pkg. Qty. 25

11-001185-001

1/4-20 x 1-1/8

Pkg. Qty. 25

11-002004-001

1/4-20 x 1

Pkg. Qty. 25

11-002002-001

1/4-20 x 3/4

Pkg. Qty. 25

11-002001-001

1/4-20 x 5/8

Pkg. Qty. 25

1/4-20 GRADE 5

11-002035-001

1/4-28 x 1-1/4

Pkg. Qty. 25

11-001222-001

1/4-28 x 3/4

Pkg. Qty. 25

1/4-28 GRADE 5

MACHINE SCREWS

11-001072-001

#10-24 x 2

Pkg. Qty. 25

11-001070-001

#10-24 x 1-3/4

Pkg. Qty. 25

11-001068-001

#10-24 x 1-1/2

Pkg. Qty. 25

11-001062-001

#10-24 x 3/4

Pkg. Qty. 25

11-001060-001

#10-24 x 5/8

Pkg. Qty. 25

HEX HEAD CAP SCREWS

Hardware illustrations are actual size.

48 | www.brunswickbowling.com

11-001258-001

5/16-18 x 1/2

Pkg. Qty. 25

11-001260-001

5/16-18 x 5/8

Pkg. Qty. 25

11-001262-001

5/16-18 x 3/4

Pkg. Qty. 25

11-001263-001

5/16-18 x 7/8

Pkg. Qty. 25

11-001264-001

5/16-18 x 1

Pkg. Qty. 25

11-001266-001

5/16-18 x 1-1/4

Pkg. Qty. 25

11-001286-001

5/16-18 x 5-1/2

Pkg. Qty. 25

5/16-18 GRADE 2

11-002075-001

5/16-18 x 3-3/4

Pkg. Qty. 25

11-001278-001

5/16-18 x 3-1/2

Pkg. Qty. 25

11-001276-001

5/16-18 x 3

Pkg. Qty. 25

11-001275-001

5/16-18 x 2-3/4

Pkg. Qty. 25

11-001272-001

5/16-18 x 2

Pkg. Qty. 25

11-001270-001

5/16-18 x 1-3/4

Pkg. Qty. 25

11-001268-001

5/16-18 x 1-1/2

Pkg. Qty. 25

HEX HEAD CAP SCREWS

Hardware illustrations are actual size.

www.brunswickbowling.com | 49

11-001304-001

5/16-24 x 1

Pkg. Qty. 25

5/16-24 GRADE 2

5/16-18 GRADE 5

11-001265-001

5/16-18 x 1-1/8

Pkg. Qty. 25

11-002068-001

5/16-18 x 2

Pkg. Qty. 25

11-002070-001

5/16-18 x 2-1/2

Pkg. Qty. 25

3/8-16 GRADE 5

11-002132-001

3/8-16 x 3

Pkg. Qty. 10

11-002128-001

3/8-16 x 2

Pkg. Qty. 10

11-001347-001

3/8-16 x 1-3/8

Pkg. Qty. 10

11-002125-001

3/8-16 x 1-1/4

Pkg. Qty. 10

11-002124-001

3/8-16 x 1

Pkg. Qty. 10

11-002094-001

5/16-24 x 1

Pkg. Qty. 25

5/16-24 GRADE 5

11-002092-001

5/16-24 x 3/4

Pkg. Qty. 25

3/8-24 GRADE 5

11-002155-000

3/8-24 x 1-1/4

Pkg. Qty. 10

10-002001-000

3/8-24 x 2-3/4

Pkg. Qty. 10

3/8-24 GRADE 2

11-001384-001

3/8-24 x 1

Pkg. Qty. 10

11-001390-001

3/8-24 x 1-3/4

Pkg. Qty. 10

11-001393-001

3/8-24 x 2-1/4

Pkg. Qty. 10

11-001394-001

3/8-24 x 2-1/2

Pkg. Qty. 10

HEX HEAD CAP SCREWS

Hardware illustrations are actual size.

50 | www.brunswickbowling.com

11-001423-001

7/16-14 x 7/8

Pkg. Qty. 10

7/16-14 GRADE 5

7/16-14 GRADE 2

11-001436-001

7/16-14 x 3

Pkg. Qty. 10

1/2-13 GRADE 5

11-002247-000

1/2-13 x 1-3/4

Pkg. Qty. 10

11-001508-001

1/2-13 x 1-1/2

Pkg. Qty. 10

1/2-13 GRADE 2

11-001506-001

1/2-13 x 1-1/4

Pkg. Qty. 10

1/2-20 GRADE 5

10-002006-000

1/2-20 x 3-1/2

Pkg. Qty. 10

HEX HEAD CAP SCREWS

Hardware illustrations are actual size.

www.brunswickbowling.com | 51

11-005092-001

#10-24 x 3/4

Pkg. Qty. 10

#10-24

11-005093-001

#10-24 x 7/8

Pkg. Qty. 10

#10-32

11-005118-001

#10-32 x 1/2

Pkg. Qty. 10

11-005120-001

#10-32 x 5/8

Pkg. Qty. 10

5/16-18

11-005263-001

5/16-18 x 7/8

Pkg. Qty. 10

11-005264-001

5/16-18 x 1

Pkg. Qty. 10

11-005266-001

5/16-18 x 1-1/4

Pkg. Qty. 10

1/4-20

11-005178-001

1/4-20 x 1/2

Pkg. Qty. 10

11-005180-001

1/4-20 x 5/8

Pkg. Qty. 10

11-005182-001

1/4-20 x 3/4

Pkg. Qty. 10

11-005183-001

1/4-20 x 7/8

Pkg. Qty. 10

11-005184-001

1/4-20 x 1

Pkg. Qty. 10

11-005194-001

1/4-20 x 2-1/2

Pkg. Qty. 10

11-005343-001

3/8-16 x 7/8

Pkg. Qty. 10

3/8-16

11-005354-001

3/8-16 x 2-1/2

Pkg. Qty. 10

3/8-24

10-009001-001

3/8-24 x 2-1/16

Pkg. Qty. 10

7/16-20

11-005474-001

7/16-20 x 2-1/2

Pkg. Qty. 10

1/2-20

11-005553-001

1/2-20 x 2-1/4

Pkg. Qty. 10

SOCKET HEAD CAP SCREWS

Hardware illustrations are actual size.

52 | www.brunswickbowling.com

11-007180-001

1/4-20 x 5/8

Pkg. Qty. 10

1/4-20

11-007182-001

1/4-20 x 3/4

Pkg. Qty. 10

11-007184-001

1/4-20 x 1

Pkg. Qty. 10

11-007186-001

1/4-20 x 1-1/4

Pkg. Qty. 10

11-007188-001

1/4-20 x 1-1/2

Pkg. Qty. 10

11-007195-001

1/4-20 x 2-3/4

Pkg. Qty. 10

11-007200-001

1/4-20 x 4

Pkg. Qty. 10

5/16-24

3/8-16

11-007344-001

3/8-16 x 1

Pkg. Qty. 10

11-007346-001

3/8-16 x 1-1/4

Pkg. Qty. 10

11-007352-001

3/8-16 x 2

Pkg. Qty. 10

1/4-28

11-007300-001

5/16-24 x 5/8

Pkg. Qty. 10

11-007216-001

1/4-28 x 3/8

Pkg. Qty. 10

5/16-18

11-007264-001

5/16-18 x 1

Pkg. Qty. 10

12-862267-001

5/16-18 x 1-3/8

Pkg. Qty. 10

3/8-24

11-007384-001

3/8-24 x 1

Pkg. Qty. 10

11-007386-001

3/8-24 x 1-1/4

Pkg. Qty. 10

11-007388-001

3/8-24 x 1-1/2

Pkg. Qty. 10

FLAT HEAD SOCKET CAP SCREWS

Hardware illustrations are actual size.

11-007086-001

#10-24 x 3/8

Pkg. Qty. 10

#10-24

11-007090-001

#10-24 x 5/8

Pkg. Qty. 10

11-007092-001

#10-24 x 3/4

Pkg. Qty. 10

www.brunswickbowling.com | 53

#10-24

11-006088-001

#10-24 x 1/2

Pkg. Qty. 10

1/4-20

11-006180-001

1/4-20 x 5/8

Pkg. Qty. 10

11-006184-001

1/4-20 x 1

Pkg. Qty. 10

11-006304-001

5/16-24 x 1

Pkg. Qty. 10

5/16-24

1/2-13

11-006504-001

1/2-13 x 1

Pkg. Qty. 10

11-006506-001

1/2-13 x 1-1/4

Pkg. Qty. 1

BUTTON HEAD SOCKET CAP SCREWS

Hardware illustrations are actual size.

54 | www.brunswickbowling.com

HI-COLLAR

SPLIT

11-196006-001

Pkg. Qty. 1

11-196008-001

#10

Pkg. Qty. 25

11-196012-001

1/4

Pkg. Qty. 25

11-196020-001

1/2

Pkg. Qty. 10

SPLIT

11-195006-001

Pkg. Qty. 1

11-195008-001

Pkg. Qty. 1

11-195010-001

#10

Pkg. Qty. 1

11-195014-001

1/4

Pkg. Qty. 1

11-195015-001

5/16

Pkg. Qty. 1

11-195016-001

3/8

Pkg. Qty. 25

11-195017-001

7/16

Pkg. Qty. 25

11-195018-001

1/2

Pkg. Qty. 25

11-195020-001

5/8

Pkg. Qty. 25

11-198002-001

Pkg. Qty. 1

EXTERNAL

TOOTH

11-198003-001

#10

Pkg. Qty. 1

11-198005-001

1/4

Pkg. Qty. 1

11-198007-001

3/8

Pkg. Qty. 25

11-198009-001

1/2

Pkg. Qty. 25

LOCKWASHERS

Hardware illustrations are actual size.

www.brunswickbowling.com | 55

11-125101-001

1/4-28

Pkg. Qty. 25

11-125103-001

5/16-24

Pkg. Qty. 25

STANDARD HEX NUTS

11-125100-001

1/4-20

Pkg. Qty. 25

COARSE FINE

11-125102-001

5/16-18

Pkg. Qty. 25

11-125104-001

3/8-16

Pkg. Qty. 25

11-125106-001

7/16-14

Pkg. Qty. 25

11-125108-001

1/2-13

Pkg. Qty. 25

11-125107-001

7/16-20

Pkg. Qty. 25

11-125109-001

1/2-20

Pkg. Qty. 25

11-125115-001

3/4-16

Pkg. Qty. 25

MACHINE SCREW NUTS

FINE

11-125000-001

#4-40

Pkg. Qty. 25

11-125001-001

#6-32

Pkg. Qty. 25

11-125003-001

#8-32

Pkg. Qty. 25

11-125005-001

#10-32

Pkg. Qty. 25

COARSE

11-125004-001

#10-24

Pkg. Qty. 25

11-125006-001

#12-24

Pkg. Qty. 25

11-125007-001

1/4-20

Pkg. Qty. 25

11-125009-001

5/16-18

Pkg. Qty. 25

11-125011-001

3/8-16

Pkg. Qty. 25

FLEXLOC NUTS

COARSE FINE

11-170104-001

#10-24

Pkg. Qty. 10

11-170106-001

1/4-20

Pkg. Qty. 10

11-170108-001

5/16-18

Pkg. Qty. 10

11-170109-001

5/16-24

Pkg. Qty. 10

11-170110-001

3/8-16

Pkg. Qty. 10

COARSE FINE

HEX NUTS

Hardware illustrations are actual size.

56 | www.brunswickbowling.com

11-170002-001

#6-32

Pkg. Qty. 25

11-170005-001

#10-24

Pkg. Qty. 25

NYLOCK NUTS

COARSE FINE

11-170004-001

#8-32

Pkg. Qty. 25

11-170006-001

#10-32

Pkg. Qty. 25

11-170008-001

1/4-28

Pkg. Qty. 25

11-170010-001

5/16-24

Pkg. Qty. 25

11-170007-001

1/4-20

Pkg. Qty. 25

11-170009-001

5/16-18

Pkg. Qty. 1

11-170011-001

3/8-16

Pkg. Qty. 25

11-170012-001

3/8-24

Pkg. Qty. 25

11-170014-001

7/16-20

Pkg. Qty. 25

11-170015-001

1/2-13

Pkg. Qty. 25

11-170016-001

1/2-20

Pkg. Qty. 25

11-125201-001

1/4-28 R.H.

Pkg. Qty. 25

JAM NUTS

COARSE

FINE

11-125200-001

1/4-20 R.H.

Pkg. Qty. 25

11-125202-001

5/16-18 R.H.

Pkg. Qty. 20

11-125204-001

3/8-16 R.H.

Pkg. Qty. 25

11-125207-001

7/16-20 R.H.

Pkg. Qty. 25

11-125206-001

7/16-14 R.H.

Pkg. Qty. 25

11-125208-001

1/2-13 R.H.

Pkg. Qty. 25

11-125209-001

1/2-20 R.H.

Pkg. Qty. 25

11-125213-001

5/8-18 R.H.

Pkg. Qty. 25

HEX NUTS

Hardware illustrations are actual size.

www.brunswickbowling.com | 57

USS

11-191014-001

3/8

Pkg. Qty. 20

11-191018-001

1/2

Pkg. Qty. 20

11-191024-001

3/4

Pkg. Qty. 10

11-190002-001

Pkg. Qty. 25

SAE

11-190004-001

Pkg. Qty. 25

11-190006-001

#10

Pkg. Qty. 25

11-190010-001

1/4

Pkg. Qty. 25

11-190012-001

5/16

Pkg. Qty. 25

11-190014-001

3/8

Pkg. Qty. 20

11-190016-001

7/16

Pkg. Qty. 20

11-190018-001

1/2

Pkg. Qty. 20

11-190022-001

5/8

Pkg. Qty. 20

FLAT WASHERS

Hardware illustrations are actual size.

58 | www.brunswickbowling.com

NON-STANDARD

10-191554-000

Pkg. Qty. 25

10-191557-000

Pkg. Qty. 25

11-190512-001

Pkg. Qty. 5

11-190511-001

Pkg. Qty. 10

11-190509-001

Pkg. Qty. 20

11-190514-001

Pkg. Qty. 5

11-190515-001

Pkg. Qty. 1

11-190519-001

Pkg. Qty. 25

FLAT WASHERS

Hardware illustrations are actual size.

www.brunswickbowling.com | 59

NON-STANDARD

11-190520-001

Pkg. Qty. 20

11-190521-001

Pkg. Qty. 25

11-190522-001

Pkg. Qty. 10

11-190527-001

Pkg. Qty. 10

11-190529-001

Pkg. Qty. 5

SPECIAL

12-252360-000

D-Washer

Pkg. Qty. 5

12-250076-002

Fiber Washer

Pkg. Qty. 10

FLAT WASHERS

Hardware illustrations are actual size.

60 | www.brunswickbowling.com

EXTERNAL

11-530012-001

Pkg. Qty. 20

11-530015-000

Pkg. Qty. 20

11-530017-001

Pkg. Qty. 20

11-530019-000

Pkg. Qty. 20

11-530021-001

Pkg. Qty. 20

11-530025-001

Pkg. Qty. 20

11-530028-000

Pkg. Qty. 20

11-530030-001

Pkg. Qty. 20

11-531008-000

Pkg. Qty. 20

INVERTED INTERNAL

11-531020-000

Pkg. Qty. 20

11-536026-000

Pkg. Qty. 20

INTERNAL SPIROL

RETAINING RINGS

Hardware illustrations are actual size.

www.brunswickbowling.com | 61

11-345154-000

1/8 x 1/2

Pkg. Qty. 25

11-345160-001

1/8 x 7/8

Pkg. Qty. 25

11-345161-000

1/8 x 15/16

Pkg. Qty. 25

11-345258-001

5/32 x 3/4

Pkg. Qty. 20

11-345264-000

5/32 x 1-1/4

Pkg. Qty. 10

11-345302-001

3/16 x 3/8

Pkg. Qty. 25

11-345304-000

3/16 x 1/2

Pkg. Qty. 25

11-345306-000

3/16 x 5/8

Pkg. Qty. 25

11-345310-001

3/16 x 3/4

Pkg. Qty. 20

11-345312-000

3/16 x 1

Pkg. Qty. 25

11-345316-000

3/16 x 1-1/2

Pkg. Qty. 25

11-345318-000

3/16 x 1-3/4

Pkg. Qty. 25

11-345404-000

1/4 x 1/2

Pkg. Qty. 1

11-345406-000

1/4 x 5/8

Pkg. Qty. 25

11-345408-001

1/4 x 3/4

Pkg. Qty. 10

11-345412-000

1/4 x 1

Pkg. Qty. 25

11-345414-000

1/4 x 1-1/4

Pkg. Qty. 25

11-345418-001

1/4 x 1-3/4

Pkg. Qty. 25

11-345420-001

1/4 x 2

Pkg. Qty. 25

11-345516-000

3/8 x 1-1/2

Pkg. Qty. 20

11-345520-001

3/8 x 2

Pkg. Qty. 20

11-345573-000

1/2 x 2-3/4

Pkg. Qty. 10

ROLL PINS

Hardware illustrations are actual size.

62 | www.brunswickbowling.com

11-360258-001

3/32 x 5/8

Pkg. Qty. 20

11-360260-000

3/32 x 3/4

Pkg. Qty. 20

11-360264-000

3/32 x 1

Pkg. Qty. 20

11-360364-000

1/8 x 1

Pkg. Qty. 20

11-360365-001

1/8 x 1-1/8

Pkg. Qty. 20

11-360415-001

5/32 x 1-1/8

Pkg. Qty. 20

11-360460-000

3/16 x 3/4

Pkg. Qty. 20

11-360465-000

3/16 x 1-1/8

Pkg. Qty. 20

11-360466-000

3/16 x 1-1/4

Pkg. Qty. 20

11-361315-000

3/16 x 1-3/8

Pkg. Qty. 20

11-360568-000

1/4 x 1-1/2

Pkg. Qty. 10

11-360619-000

5/16 x 1-5/8

Pkg. Qty. 25

SPIROL PINS

Hardware illustrations are actual size.

www.brunswickbowling.com | 63

12-100187-009

Pkg. Qty. 5

SQUARE KEYS

Moving deck-scissor control cable pulley/sha assembly, Jetback ball booster sha

12-400138-007

Pkg. Qty. 5

12-400138-002

Pkg. Qty. 5

Pin wheel jack sha - single small sheave, Turret drive bevel gear sha/belt sheave

Elevator jack shas - 12" sheaves

Pin wheel jack sha - magnetic clutch keyway

Elevator jack shas - small sheaves

Detector main sha. Pinsetter motor sha (shorten as required)

Ball wheel jack sha - ball wheel pulley keyway

1 to 1 sha - spur gear

1 to 1 sha - moving deck, scissor and rake cams

4 to 1 sha - bronze gear

1 to 1 sha - extended cycle cams

Pin wheel jack sha - nylon bevel gear drive

12-400138-006

Pkg. Qty. 5

12-400138-004

Pkg. Qty. 5

12-100187-011

Pkg. Qty. 5

12-400138-003

Pkg. Qty. 5

12-100187-007

Pkg. Qty. 5

12-100187-008

Pkg. Qty. 5

12-100187-002

Pkg. Qty. 5

12-100164-000

Pkg. Qty. 5

12-400138-008

Pkg. Qty. 5

RECTANGULAR KEYS

MACHINE KEYS

Hardware illustrations are actual size.

64 | www.brunswickbowling.com

12-100318-002

Pkg. Qty. 5

12-100318-003

Pkg. Qty. 1

12-100166-002

Pkg. Qty. 5

12-100166-004

Pkg. Qty. 5

12-100166-005

Pkg. Qty. 5

12-150158-013

Pkg. Qty. 5

12-100166-006

Pkg. Qty. 5

12-100166-024

Pkg. Qty. 5

12-100166-022

Pkg. Qty. 5

12-100166-008

Pkg. Qty. 5

12-100166-026

Pkg. Qty. 5

12-100166-025

Pkg. Qty. 5

12-150158-007

Pkg. Qty. 5

12-150158-006

Pkg. Qty. 5

12-150158-012

Pkg. Qty. 5

12-100166-019

Pkg. Qty. 5

12-100166-009

Pkg. Qty. 5

12-100166-011

Pkg. Qty. 5

12-250010-011

Pkg. Qty. 5

12-100166-027

Pkg. Qty. 5

12-100166-007

Pkg. Qty. 5

12-100166-013

Pkg. Qty. 5

12-100166-014

Pkg. Qty. 5

12-100166-015

Pkg. Qty. 5

12-150158-015

Pkg. Qty. 5

12-100166-016

Pkg. Qty. 5

12-100166-017

Pkg. Qty. 5

12-100166-032

Pkg. Qty. 5

12-150158-017

Pkg. Qty. 5

XWASHER PINS

Hardware illustrations are actual size.

www.brunswickbowling.com | 65

10-229601-000

Pkg. Qty. 1

12-250010-007

Pkg. Qty. 2

10-229602-000

Pkg. Qty. 1

12-150023-007

Pkg. Qty. 2

12-150023-008

Pkg. Qty. 2

12-450006-002

Pkg. Qty. 1

12-150023-002

Pkg. Qty. 2

12-100166-021

Pkg. Qty. 2

12-200081-002

Pkg. Qty. 2

12-100166-029

Pkg. Qty. 2

12-100166-031

Pkg. Qty. 2

12-150158-009

Pkg. Qty. 2

12-150158-004

Pkg. Qty. 2

12-150158-014

Pkg. Qty. 2

12-150158-016

Pkg. Qty. 2

12-350023-002

Pkg. Qty. 2

11-230000-001

Pkg. Qty. 25

11-230001-001

Pkg. Qty. 25

11-230002-001

Pkg. Qty. 25

11-230003-001

Pkg. Qty. 25

11-230005-001

Pkg. Qty. 25

XWASHERS AND PINS

Hardware illustrations are actual size.

66 | www.brunswickbowling.com

11-420000-000

Pkg. Qty. 5

Rear Long Link

12-150190-000

Pkg. Qty. 5

“C” Link to Indexing

Bell Crank

11-420046-000

Pkg. Qty. 1

Interlock Probe

11-420043-000

Pkg. Qty. 1

Long Link Bell Crank

11-423000-000

Pkg. Qty. 5

OOR Controller - Bottom

11-420070-000

Pkg. Qty. 1

Scissors Distribution

Rod Lever

11-420097-000

Pkg. Qty. 10

Scissors Connecting

Rod Ends

12-250091-000

Pkg. Qty. 5

Standing Pins

Selector Pivot

11-420008-000

Pkg. Qty. 5

Pit Cushion Li Rod and

Ball Stop Hook

12-100334-000

Pkg. Qty. 5

Clutch Yoke Pivot

11-420009-000

Pkg. Qty. 5

Spring Guide Tube

11-420066-000

Pkg. Qty. 1

Rake Sweep Sha

Le Hand

11-420015-000

Pkg. Qty. 1

Gear Box Clutch

Support

“A” Triggering Kit

11-420011-000

Pkg. Qty. 5

Gear Box Clutch

Lever Support

11-420095-000

Pkg. Qty. 5

Rake Support Arm

12-250075-100

Pkg. Qty. 2

Rake Li Sha / Shock Mount /

Pit Cushion Arm

“A” Style

12-250075-000

Pkg. Qty. 2

Rake Li Sha / Shock Mount / Pit

Cushion Arm

“A” Style

11-420096-000

Pkg. Qty. 1

Rake Trip Sha

Shotgun

11-420035-000

Pkg. Qty. 1

Rake Trip Sha

Shotgun

Rake Crank Rod

SLEEVE OILITE BEARINGS

Hardware illustrations are actual size.

www.brunswickbowling.com | 67

12-250248-000

Pkg. Qty. 2

Pit Cushion

Li Rod Ends

11-420102-000

Pkg. Qty. 1

Rake Li Rod

11-420063-000

Pkg. Qty. 5

Rake Li Rod

11-420045-000

Pkg. Qty. 5

Elevator

Jack Sha

11-420054-000

Pkg. Qty. 1

Pit Conveyor

Pulley Arm

10-424001-000

Pkg. Qty. 1

Ball Cushion

Mount

11-420098-000

Pkg. Qty. 1

Rake Trip Sha

Shotgun

11-420094-000

Pkg. Qty. 1

Pit Cushion

11-420019-000

Pkg. Qty. 5

Clutch Cam Follower

Spring Guide Tube

11-420018-000

Pkg. Qty. 5

Moving Deck

Scissors Latch “Flag”

SLEEVE OILITE BEARINGS

Hardware illustrations are actual size.

68 | www.brunswickbowling.com

11-421061-000

Pkg. Qty. 5

Long Link

11-421045-000

Pkg. Qty. 10

Pin Release

Lever

11-421102-000

Pkg. Qty. 5

Rake Trip Arm

12-200105-000

Pkg. Qty. 5

Scissors

11-421004-000

Pkg. Qty. 5

Pin Release

Lever

11-421053-000

Pkg. Qty. 5

Cross Conveyor

Pin Gate

11-421026-000

Pkg. Qty. 5

Turret Interlock

Probe

11-421104-000

Pkg. Qty. 5

Rake Li Sha

11-421048-000

Pkg. Qty. 1

Indexing Bell

Crank Lever

11-421008-000

Pkg. Qty. 1

Spider Release

Lever

12-150255-000

Pkg. Qty. 5

Turret Frame

11-421065-000

Pkg. Qty. 5

Torsion Latch

11-421035-000

Pkg. Qty. 5

Time Delay Gear

11-421015-000

Pkg. Qty. 5

Detector, Detector

Mounting Plate,

Gear Box

11-421110-000

Pkg. Qty. 5

Motor-Elevator

Belt Tensioner

all Preference System

11-421017-000

Pkg. Qty. 5

Rake Sweep Sha

FLANGED OILITE BEARINGS

Hardware illustrations are actual size.

www.brunswickbowling.com | 69

11-421027-000

Pkg. Qty. 1

Rake Crank Rod

11-421093-000

Pkg. Qty. 5

2 Piece Clutch

Reset Lever

11-421019-000

Pkg. Qty. 1

Deck Jam Kit,

Rake Li

Cam Follower,

Elevator Idler Arm

11-421103-000

Pkg. Qty. 5

Rake Li Sha

11-421111-000

Pkg. Qty. 5

Ball Stop

11-421058-000

Pkg. Qty. 5

Pit Conveyor

Pulley Arm

12-200104-000

Pkg. Qty. 5

Scissor Arm

10-421901-000

Pkg. Qty. 2

“Y” Switch

11-421109-000

Pkg. Qty. 2

Moving Deck

Cam Follower

Scissors Cam Follower

12-150154-000

Pkg. Qty. 1

Turret Clutch Plate

11-421041-000

Pkg. Qty. 2

Ball Li

Rod Arms

12-400199-000

Pkg. Qty. 2

Ball Li Rod Arms

FLANGED OILITE BEARINGS

Hardware illustrations are actual size.

70 | www.brunswickbowling.com

11-430004-000

Ball Wheel Guide Roller

11-430008-000

Deck Lowering Link Connector

Pin Wheel Guide Roller

10-430001-000

Pin Wheel Jack Sha

11-413001-000

Ball Booster Sha

BALL BEARINGS

Hardware illustrations are actual size.

www.brunswickbowling.com | 71

11-430003-000

2:1 Sha

11-430002-000

4:1 Sha

BALL BEARINGS

Hardware illustrations are actual size.

72 | www.brunswickbowling.com

11-430028-000

Elevator Drive Belt Tensioner

11-430011-000

1:1 Sha

11-430013-000

Ball Wheel Roller

Pin Wheel Roller

Ball Accelerator Pulleys

11-430015-000

Pinsetter Motor - Front

BALL BEARINGS

Hardware illustrations are actual size.

www.brunswickbowling.com | 73

11-430016-000

Jogger Arm

11-430017-000

2:1 Sha

11-430018-000

Cross Conveyor Drive Sha

BALL BEARINGS

Hardware illustrations are actual size.

74 | www.brunswickbowling.com

11-431002-000

Detector 1:1 Sha

11-431006-000

Turret Clutch

11-430037-000

Ball Stop Hook

11-430045-000

Magnetic Clutch - 4:1 Sha

11-431000-000

Deck Support Arm Deck Li Sha

BALL BEARINGS

Hardware illustrations are actual size.

www.brunswickbowling.com | 75

11-432001-000

4:1 Sha

11-431003-000

Detector 1:1 Sha

11-431010-000

Turret Clutch

11-432000-000

Pin Wheel Guide Roller

BALL BEARINGS

Hardware illustrations are actual size.

76 | www.brunswickbowling.com

12-100482-000

Cable and Tube Assembly

12-150222-000

Clutch and Pulley Assembly

12-150087-000

Trip Lever and Spring Assembly

12-100481-000

Cable and Tube Assembly

COMPRESSION SPRINGS

Hardware illustrations are actual size.

www.brunswickbowling.com | 77

12-300172-000

Pit Conveyor Assembly

12-350126-000

Frame Assembly

12-400122-000

Ball Li Rod Assembly

COMPRESSION SPRINGS

Hardware illustrations are actual size.

78 | www.brunswickbowling.com

Hardware illustrations are actual size.

12-100296-000

Gear Box Assembly

12-100105-000

Gear Box Assembly

12-102105-000

Gear Box Assembly

Complete Triggering Kit

12-102043-000

Gear Box Assembly

12-100158-000

Gear Box Assembly

12-502114-000

Model A•2 Pinsetter Center Ball Return System

12-502167-000

Model A•2 Pinsetter Center Ball Return System

TENSION SPRINGS

www.brunswickbowling.com | 79

Hardware illustrations are actual size.

12-150070-000

Turret Assembly

12-150096-000

Turret Assembly

TENSION SPRINGS

80 | www.brunswickbowling.com

10-002001-000 Hex Head Cap Screw 3/8-24 x 2-3/4'' 49

10-002006-000 Hex Head Cap Screw 1/2-20 x 3-1/2'' 50

10-009001-001 Hex Socket Head Screw 3/8-24 x 2-1/16'' 51

10-191554-000 Flat Washer - Non-Standard 58

10-191557-000 Flat Washer - Non-Standard 58

10-229601-000 X-Washer Pin 65

10-229602-000 X-Washer Pin 65

10-421901-000 Flanged Oilite Bearing 69

10-424001-000 Sleeve Oilite Bearing 67

10-430001-000 Ball Bearing, w/ Snap Ring 70

10-635127-000 Accelerator Flat Belt 26

11-001060-001 Hex Head Cap Screw 47

11-001062-001 Hex Head Cap Screw 47

11-001068-001 Hex Head Cap Screw 47

11-001070-001 Hex Head Cap Screw 47

11-001072-001 Hex Head Cap Screw 47

11-001178-001 Hex Head Cap Screw 46

11-001180-001 Hex Head Cap Screw 46

11-001182-001 Hex Head Cap Screw 46

11-001183-001 Hex Head Cap Screw 46

11-001184-001 Hex Head Cap Screw 46

11-001185-001 Hex Head Cap Screw 47

11-001186-001 Hex Head Cap Screw 46

11-001188-001 Hex Head Cap Screw 46

11-001190-001 Hex Head Cap Screw 46

11-001192-001 Hex Head Cap Screw 46

11-001193-001 Hex Head Cap Screw 46

11-001194-001 Hex Head Cap Screw 46

11-001195-001 Hex Head Cap Screw 46

11-001196-001 Hex Head Cap Screw 46

11-001222-001 Hex Head Cap Screw 47

11-001258-001 Hex Head Cap Screw 34, 48

11-001260-001 Hex Head Cap Screw 48

11-001262-001 Hex Head Cap Screw 48

11-001263-001 Hex Head Cap Screw 48

11-001264-001 Hex Head Cap Screw 48

11-001265-001 Hex Head Cap Screw 49

11-001266-001 Hex Head Cap Screw 48

11-001268-001 Hex Head Cap Screw 48

11-001270-001 Hex Head Cap Screw 48

11-001272-001 Hex Head Cap Screw 48

11-001275-001 Hex Head Cap Screw 48

11-001276-001 Hex Head Cap Screw 48

11-001278-001 Hex Head Cap Screw 48

11-001286-001 Hex Head Cap Screw 48

11-001304-001 Hex Head Cap Screw 49

11-001347-001 Hex Head Cap Screw 49

11-001384-001 Hex Head Cap Screw 49

11-001390-001 Hex Head Cap Screw 49

11-001393-001 Hex Head Cap Screw 49

11-001394-001 Hex Head Cap Screw 49

11-001423-001 Hex Head Cap Screw 50

11-001436-001 Hex Head Cap Screw 50

11-001506-001 Hex Head Cap Screw 50

11-001508-001 Hex Head Cap Screw 50

11-002001-001 Hex Head Cap Screw 47

11-002002-001 Hex Head Cap Screw 47

11-002004-001 Hex Head Cap Screw 47

11-002005-001 Hex Head Cap Screw 47

11-002006-001 Hex Head Cap Screw 47

11-002008-001 Hex Head Cap Screw 47

11-002035-001 Hex Head Cap Screw 47

11-002068-001 Hex Head Cap Screw 49

11-002070-001 Hex Head Cap Screw 49

11-002075-001 Hex Head Cap Screw 48

11-002092-001 Hex Head Cap Screw 49

11-002094-001 Hex Head Cap Screw 49

11-002124-001 Hex Head Cap Screw 49

11-002125-001 Hex Head Cap Screw 49

11-002128-001 Hex Head Cap Screw 49

11-002132-001 Hex Head Cap Screw 49

11-002155-000 Hex Head Cap Screw 49

11-002247-000 Hex Head Cap Screw 50

11-005093-001 Socket Head Cap Screw 51

11-005118-001 Socket Head Cap Screw 51

11-005120-001 Socket Head Cap Screw 51

11-005178-001 Socket Head Cap Screw 51

11-005180-001 Socket Head Cap Screw 51

11-005182-001 Hex Head Socket Cap Screw 51

11-005183-001 Hex Head Socket Cap Screw 51

11-005184-001 Socket Head Cap Screw 51

11-005194-001 Socket Head Cap Screw 51

11-005263-001 Hex Head Cap Screw 51

11-005264-001 Socket Head Cap Screw 51

11-005266-001 Socket Head Cap Screw 51

11-005343-001 Socket Head Cap Screw 51

11-005354-001 Socket Head Cap Screw 51

11-005474-001 Socket Head Cap Screw 51

11-005553-001 Socket Head Cap Screw 51

11-006088-001 Button Head Socket Cap Screw 53

11-006180-001 Button Head Socket Cap Screw 53

11-006184-001 Button Head Socket Cap Screw 53

11-006304-001 Button Head Socket Cap Screw 53

11-006504-001 Button Head Socket Cap Screw 53

11-006506-001 Button Head Socket Cap Screw 53

11-007086-001 Flat Head Socket Cap Screw 52

11-007090-001 Flat Head Socket Cap Screw 52

11-007092-001 Flat Head Socket Cap Screw 52

11-007180-001 Flat Head Socket Cap Screw 52

11-007182-001 Flat Head Socket Cap Screw 52

11-007184-001 Flat Head Socket Cap Screw 52

11-007186-001 Flat Head Socket Cap Screw 52

11-007188-001 Flat Head Socket Cap Screw 52

11-007195-001 Flat Head Socket Cap Screw 52

11-007200-001 Flat Head Socket Cap Screw 52

11-007216-001 Flat Head Socket Cap Screw 52

11-007264-001 Flat Head Socket Cap Screw 52

11-007300-001 Flat Head Socket Cap Screw 52

11-007344-001 Flat Head Socket Cap Screw 52

11-007346-001 Flat Head Socket Cap Screw 52

11-007352-001 Flat Head Socket Cap Screw 52

11-007384-001 Flat Head Socket Cap Screw 52

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

www.brunswickbowling.com | 81

11-007386-001 Flat Head Socket Cap Screw 52

11-007388-001 Flat Head Socket Cap Screw 52

11-051010-001 Hex Head Cap Screw 8mm x 20mm 17, 23

11-051012-001 Hex Head Cap Screw 10mm x 70mm 15

11-051014-001 Hex Head Cap Screw 6mm x 45mm 13

11-051018-001 Hex Head Cap Screw 6mm x 20mm 21

11-051026-001 Hex Head Cap Screw 8mm x 40mm 23

11-051028-001 Truss Hd. Screw 6mm x 25mm 11

11-051035-001 Hex Head Cap Screw 6mm x 16mm 25

11-051038-001 Hex Head Cap Screw 8mm x 16mm 25, 34

11-051044-001 Hex Head Bolt 34

11-051055-001 Hex Head Cap Screw 8mm x 60mm 15

11-051058-001 Hex Head Cap Screw 10mm x 55mm 15

11-051062-001 Hex Head Cap Screw 12mm x 25mm 19

11-051070-001 Hex Head Cap Screw 12mm x 60mm 17, 19

11-051071-000 Hex Head Cap Screw M10 x 60mm 15

11-051081-001 Hex Head Cap Screw 8mm x 100mm 23

11-051515-001 Socket Head Screw 6mm x 18mm 15, 21

11-051520-001 Socket Head Screw 6mm x 20mm 21

11-051546-001 Hex Head Cap Screw 5mm x 40mm 21

11-051564-009 Socket Head Screw 12mm x 60mm 15

11-051702-001 Hex Nut (6 mm) 41

11-051703-001 Hex Nut 10mm 9, 15

11-051704-001 Hex Nut 8mm 15, 23

11-051706-001 Hex Nut 12mm 15

11-051742-001 Locknut 5mm 21, 25

11-051743-001 Locknut 6mm 11, 21, 25

11-051744-001 Locknut 8mm 11, 15, 17, 23, 25

11-051745-001 Locknut 10mm 15, 17

11-051747-001 Locknut 12mm 17, 19

11-051769-001 Lock washer 41

11-051770-001 Lockwasher 8mm 17, 23

11-051771-001 Lockwasher 10mm 15

11-051772-001 Lockwasher 12mm 15, 19

11-051786-001 Cotter Pin 17

11-051852-001 Retaining Ring 17mm 17, 19, 21

11-051856-001 Retaining Ring 25mm 19, 21

11-051858-001 Retaining Ring 15mm 9

11-051869-000 Retaining Ring 15mm 16, 17

11-051877-001 Socket Hd. Screw 6mm x 25mm 11

11-051878-001 Truss Head Screw 8mm x 45mm 11

11-051902-001 Retaining Ring 52mm 9

11-052006-001 Washer 8.4mm 23

11-052008-001 Flat Washer (6.4 mm) 11

11-052015-001 Flat Washer 13mm 15

11-052017-001 Flat Washer 8.4mm 11

11-052018-001 Flat Washer 10.5mm 15

11-052019-001 Flat Washer 8.4mm 9, 11, 17, 21, 23

11-052034-001 Flat Washer 17

11-052035-001 Flat Washer 10mm 17

11-052037-001 Flat Washer 6.4mm 11, 21, 41

11-052039-001 Flat Washer 5.3mm 21, 25

11-052050-001 Flat Washer 10.5mm 9, 15

11-052150-001 Finishing Washer 8mm (GS-92) 9

11-052401-001 Slotted Pan Head Screw 8mm x 50mm (GS-92) 9

11-052601-001 Carriage Bolt 8mm x 30mm 17

11-052614-001 Carriage Bolt 6 mm x 40 mm 17

11-052618-001 Carriage Bolt 10mm x 50mm 15

11-052929-000 Slotted Pan Head Screw 10mm x 50mm 9

11-052930-000 Hex Head Cap Screw 10mm x 60mm 9

11-052938-001 Flat Head Screw 8mm x 12mm 25

11-053493-000 Key 8mm x 7mm x 45mm 19

11-053503-000 Metric Key 8mm x 7mm x 28mm 18, 19

11-053507-000 Key 8mm x 7mm x 30mm 19

11-053578-000 Cushion Rubber Bumper 14, 15

11-053579-000 Rubber Mount 22, 23

11-053581-000 OEM Transport Band - Long Pit 4, 8

11-053587-000 Rubber Bumper 25mm x 15mm 25

11-053588-000 Rubber Bumper 30mm x 20mm 25

11-053901-000 V-Belt 18

11-053902-000 V-Belt 18

11-053903-000 V-Belt 18, 21

11-053904-000 V-Belt 18

11-053905-000 V-Belt 18

11-053907-000 V-Belt 18

11-053909-000 V-Belt 9, 18

11-053910-000 V-Belt 9, 18

11-054300-001 Cotter Pin 2mm 19

11-054449-000 Hex Head Self-Tapping Screw K70 x 18mm 21

11-054459-000 Self Tapping, Torx Screw K60 x 16mm 11

11-054466-000 Plastic Fastener Screw 27

11-054803-001 Socket Hd. Cap Screw 41

11-055351-000 Sealing Ring, all GS Shocks 15

11-055500-001 Hex Nut 6mm 13

11-055800-000 EJOT-PLASTIC NUTS 3.5 26

11-082862-001 Self Tapping Screw (#14-10 x 1”) 41

11-125000-001 Machine Screw Hex Nut 55

11-125001-001 Machine Screw Hex Nut 55

11-125003-001 Machine Screw Hex Nut 55

11-125004-001 Machine Screw Hex Nut 55

11-125005-001 Machine Screw Hex Nut 55

11-125006-001 Hex Nut 12-24 55

11-125007-001 Machine Screw Hex Nut 55

11-125009-001 Hex Nut 5/16-18 55

11-125011-001 Machine Screw Hex Nut 55

11-125100-001 Hex Hut 1/4-20 55

11-125101-001 Standard Hex Nut 55

11-125102-001 Hex Nut 5/16-18 55

11-125103-001 Standard Hex Nut 55

11-125104-001 Hex Nut 3/8-16 55

11-125106-001 Hex Nut 7/16-14 55

11-125107-001 Standard Hex Nut 55

11-125108-001 Standard Hex Nut 55

11-125109-001 Standard Hex Nut 55

11-125115-001 Hex Nut 3/4-16 55

11-125200-001 Hex Jam Nut 1/4-20 56

11-125201-001 Hex Jam Nut 1/4-28 56

11-125202-001 Jam Hex Nut 56

11-125204-001 Hex Jam Nut 3/8-16 56

11-125206-001 Jam Hex Nut 56

11-125207-001 Jam Hex Nut 56

11-125208-001 Hex Jam Nut 1/2-13 56

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

82 | www.brunswickbowling.com

11-125209-001 Hex Jam Nut 1/2-20 56

11-125213-001 Jam Hex Nut 56

11-135400-000 Rubber Well Nut, Series 43-76 9

11-170002-001 Nylock Hex Nut 56

11-170004-001 Clutch Lever Lock Nut 56

11-170005-001 Nylock Hex Nut 56

11-170006-001 Locknut 10-32 56

11-170007-001 Hex Nut Nylock 1/4-20 56

11-170008-001 Nylock Hex Nut 56

11-170009-001 Hex Nut Nylock 5/16-18 56

11-170010-001 Hex Nut Nylock 5/16-24 56

11-170011-001 Hex Nut Nyloc 3/8-16 56

11-170012-001 Hex Nut Nylock 3/8-24 56

11-170014-001 Hex Nut Nylock 7/16-20 56

11-170015-001 Nylock Hex Nut 56

11-170016-001 Hex Nut Nylock 1/2-20 56

11-170104-001 Flexloc Hex Nut 55

11-170106-001 Flexloc Hex Nut 55

11-170108-001 Flexlock Hex Nut 5/16-18 55

11-170109-001 Hex Nut Flexloc 5/16-24 55

11-170110-001 Flexloc Hex Nut 55

11-176000-001 Keps Nut 51

11-190002-001 Flat Washer - SAE 57

11-190004-001 Flat Washer - SAE 57

11-190006-001 Flat Washer - SAE #10 57

11-190010-001 Flat Washer 1/4 57

11-190012-001 Flat Washer 5/16 57

11-190014-001 Flat Washer 3/8 57

11-190016-001 Flat Washer 7/16 57

11-190018-001 Flat Washer 1/2 57

11-190022-001 Flat Washer - SAE 57

11-190509-001 Flat Washer - Non-Standard 58

11-190511-001 Flat Washer - Non-Standard 58

11-190512-001 Flat Washer - Non-Standard 58

11-190514-001 Flat Washer - Non-Standard 58

11-190515-001 Flat Washer - Non-Standard 58

11-190519-001 Flat Washer - Non-Standard 58

11-190520-001 Flat Washer - Non-Standard 59

11-190521-001 Flat Washer - Non-Standard 59

11-190522-001 Flat Washer - Non-Standard 59

11-190527-001 Flat Washer - Non-Standard 59

11-190529-001 Flat Washer - Non-Standard 59

11-191014-001 Flat Washer 3/8 57

11-191018-001 Flat Washer 1/2 57

11-191024-001 Flat Washer 3/4 57

11-195006-001 Split Lockwasher 54

11-195008-001 Split Lockwasher 54

11-195010-001 Lockwasher #10 54

11-195014-001 Lockwasher 1/4'' 54

11-195015-001 Lockwasher 5/16 54

11-195016-001 Lockwasher 3/8 54

11-195017-001 Lockwasher 7/16 54

11-195018-001 Lockwasher 54

11-195020-001 Split Lockwasher 54

11-196006-001 Hi-Collar Split Lockwasher 54

11-196008-001 Hi-Collar Split Lockwasher 54

11-196012-001 Hi-Collar Lockwasher 1/4 54

11-196020-001 Hi-Collar Split Lockwasher 54

11-198002-001 External Tooth Lockwasher 54

11-198003-001 External Tooth Lockwasher 54

11-198005-001 External Tooth Lockwasher 54

11-198007-001 External Tooth Lockwasher 54

11-198009-001 External Tooth Lockwasher 54

11-230000-001 X-Washer 3/32 65

11-230001-001 X-Washer 1/8 65

11-230002-001 X-Washer 5/32 65

11-230003-001 X-Washer 65

11-230005-001 X-Washer 1/4 65

11-345154-000 Roll Pin 61

11-345160-001 Roll Pin 61

11-345161-000 Roll Pin 61

11-345258-001 Roll Pin 61

11-345264-000 Roll Pin 61

11-345302-001 Roll Pin 3/16x3/8'' 61

11-345304-000 Roll Pin 3/16x1/2'' 61

11-345306-000 Roll Pin 3/16x5/8'' 61

11-345310-001 Roll Pin 3/16x7/8'' 61

11-345312-000 Roll Pin 3/16x1'' 61

11-345316-000 Roll Pin 61

11-345318-000 Roll Pin 61

11-345404-000 Roll Pin 1/4x1/2'' 61

11-345406-000 Roll Pin 61

11-345408-001 Roll Pin 61

11-345412-000 Roll Pin 61

11-345414-000 Roll Pin 61

11-345418-001 Roll Pin 61

11-345420-001 Roll Pin 61

11-345516-000 Roll Pin 61

11-345520-001 Roll Pin 61

11-345573-000 Roll Pin 61

11-360258-001 Spirol Pin 62

11-360260-000 Spirol Pin 62

11-360264-000 Spirol Pin 62

11-360364-000 Spirol Pin 62

11-360365-001 Spirol Pin 62

11-360415-001 Spirol Pin 62

11-360460-000 Spirol Pin 62

11-360465-000 Spirol Pin 62

11-360466-000 Spirol Pin 62

11-360568-000 Spirol Pin 62

11-360619-000 Spirol Pin 62

11-361315-000 Spirol Pin 62

11-413001-000 Ball Bearing 70

11-420000-000 Sleeve Oilite Bearing 66

11-420008-000 Sleeve Oilite Bearing 66

11-420009-000 Sleeve Oilite Bearing 66

11-420011-000 Sleeve Oilite Bearing 66

11-420015-000 Sleeve Oilite Bearing 66

11-420018-000 Sleeve Oilite Bearing 67

11-420019-000 Sleeve Oilite Bearing 67

11-420035-000 Sleeve Oilite Bearing 66

11-420043-000 Sleeve Oilite Bearing 66

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

www.brunswickbowling.com | 83

11-420045-000 Sleeve Oilite Bearing 67

11-420046-000 Sleeve Oilite Bearing 66

11-420054-000 Sleeve Oilite Bearing 67

11-420063-000 Sleeve Oilite Bearing 67

11-420066-000 Sleeve Oilite Bearing 66

11-420070-000 Sleeve Oilite Bearing 66

11-420094-000 Sleeve Oilite Bearing 67

11-420095-000 Sleeve Oilite Bearing 66

11-420096-000 Sleeve Oilite Bearing 66

11-420097-000 Sleeve Oilite Bearing 66

11-420098-000 Sleeve Oilite Bearing 67

11-420102-000 Sleeve Oilite Bearing 67

11-421004-000 Flanged Oilite Bearing 68

11-421008-000 Flanged Oilite Bearing 68

11-421015-000 Flanged Oilite Bearing 68

11-421017-000 Flanged Oilite Bearing 68

11-421019-000 Flanged Oilite Bearing 69

11-421026-000 Flanged Oilite Bearing 68

11-421027-000 Flanged Oilite Bearing 69

11-421035-000 Flanged Oilite Bearing 68

11-421041-000 Flanged Oilite Bearing 69

11-421045-000 Flanged Oilite Bearing 68

11-421048-000 Flanged Oilite Bearing 68

11-421053-000 Flanged Oilite Bearing 68

11-421058-000 Flanged Oilite Bearing 69

11-421061-000 Flanged Oilite Bearing 68

11-421065-000 Flanged Oilite Bearing 68

11-421093-000 Flanged Oilite Bearing 69

11-421102-000 Flanged Oilite Bearing 68

11-421103-000 Flanged Oilite Bearing 69

11-421104-000 Flanged Oilite Bearing 68

11-421109-000 Flanged Oilite Bearing 69

11-421110-000 Flanged Oilite Bearing 68

11-421111-000 Flanged Oilite Bearing 69

11-423000-000 Sleeve Oilite Bearing 66

11-430002-000 Ball Bearing 71

11-430003-000 Ball Bearing 71

11-430004-000 Ball Bearing 70

11-430007-000 Ball Bearing 23

11-430008-000 Ball Bearing 70

11-430011-000 Ball Bearing 72

11-430013-000 Ball Bearing 21, 72

11-430015-000 Ball Bearing 72

11-430016-000 Ball Bearing 73

11-430017-000 Ball Bearing 73

11-430018-000 Ball Bearing 73

11-430028-000 Ball Bearing 37, 72

11-430037-000 Ball Bearing 74

11-430045-000 Ball Bearing 74

11-430051-000 Ball Bearing 19

11-430052-000 Ball Bearing 19

11-430055-000 Deep Groove Ball Bearing 9

11-431000-000 Ball Bearing 74

11-431002-000 Ball Bearing 74

11-431003-000 Ball Bearing 75

11-431006-000 Ball Bearing 74

11-431010-000 Ball Bearing 75

11-432000-000 Ball Bearing 75

11-432001-000 Ball Bearing 75

11-500552-000 Torrington Clutch and Bearing Assembly 36

11-530012-001 Retaining Ring - External 60

11-530015-000 Retaining Ring - External 60

11-530017-001 Retaining Ring - External 60

11-530019-000 Retaining Ring - External 60

11-530021-001 Retaining Ring - External 60

11-530025-001 Retaining Ring - External 60

11-530028-000 Retaining Ring - External 60

11-530030-001 Retaining Ring - External 60

11-531008-000 Retaining Ring - Inverted Internal 60

11-531020-000 Retaining Ring - Inverted Internal 60

11-536026-000 Spirol Retaining Ring 60

11-600500-000 Master Link (3-Piece) 19

11-603301-000 Overﬂow Chute Clamp 25

11-615014-000 Reset Button 38

11-615048-000 Lockout Power Switch - Red 29

11-615101-000 Terminal-37 pin on Setting Table 31

11-615511-000 ON/OFF Toggle Switch w/Nut 29

11-615519-000 Toggle Switch 43

11-616034-000 Replacement Toggle Switch 28

11-635201-000 AP - OEM Transport Band Belt 4, 8, 9

11-635201-100 Certiﬁed Transport Band Belt 8, 9

11-651103-000 Rubber Replacement for Ball Rack Tips 38

11-675501-000 Light Bulb 43

11-675503-000 Light Bulb 43

11-675513-002 Light Bulb 43

11-675514-002 Light Bulb 43

11-675517-002 Light Bulb 43

11-675521-002 Light Bulb 43

11-675523-000 Light Bulb 43

11-675582-000 Light Bulb 43

11-676308-000 Nyogel 788 Lubricant 31

11-676361-000 Non-Lithium Grease - 14.5 oz. 31

11-682569-000 No Step Decal 6

12-100105-000 Tension Spring 78

12-100158-000 Tension Spring 78

12-100164-000 Machine Key - Rectangular 63

12-100166-002 X-Washer Pin 64

12-100166-004 X-Washer Pin 64

12-100166-005 X-Washer Pin 64

12-100166-006 X-Washer Pin 64

12-100166-007 X-Washer Pin 64

12-100166-008 X-Washer Pin 64

12-100166-009 X-Washer Pin 64

12-100166-011 X-Washer Pin 64

12-100166-013 X-Washer Pin 64

12-100166-014 X-Washer Pin 64

12-100166-015 X-Washer Pin 64

12-100166-016 X-Washer Pin 64

12-100166-017 X-Washer Pin 64

12-100166-019 X-Washer Pin 64

12-100166-021 X-Washer Pin 65

12-100166-022 X-Washer Pin 64

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

84 | www.brunswickbowling.com

12-100166-024 X-Washer Pin 64

12-100166-025 X-Washer Pin 64

12-100166-026 X-Washer Pin 64

12-100166-027 X-Washer Pin 64

12-100166-029 X-Washer Pin 65

12-100166-031 X-Washer Pin 65

12-100166-032 X-Washer Pin 64

12-100187-002 Machine Key - Square 63

12-100187-007 Machine Key - Square 63

12-100187-008 Machine Key - Square 63

12-100187-009 Machine Key - Square 63

12-100187-011 Machine Key - Square 63

12-100296-000 Tension Spring 78

12-100318-002 X-Washer Pin 64

12-100318-003 X-Washer Pin 64

12-100334-000 Sleeve Oilite Bearing 66

12-100481-000 Compression Spring 76

12-100482-000 Compression Spring 76

12-102043-000 Tension Spring 78

12-102105-000 Tension Spring 78

12-150023-002 X-Washer Pin 65

12-150023-007 X-Washer Pin 65

12-150023-008 X-Washer Pin 65

12-150070-000 Tension Spring 79

12-150087-000 Compression Spring 76

12-150096-000 Tension Spring 79

12-150154-000 Flanged Oilite Bearing 69

12-150158-004 X-Washer Pin 65

12-150158-006 X-Washer Pin 64

12-150158-007 X-Washer Pin 64

12-150158-009 X-Washer Pin 65

12-150158-012 X-Washer Pin 64

12-150158-013 X-Washer Pin 64

12-150158-014 X-Washer Pin 65

12-150158-015 X-Washer Pin 64

12-150158-016 X-Washer Pin 65

12-150158-017 X-Washer Pin 64

12-150190-000 Sleeve Oilite Bearing 66

12-150222-000 Compression Spring 76

12-150255-000 Flanged Oilite Bearing 68

12-200081-002 X-Washer Pin 65

12-200104-000 Flanged Oilite Bearing 69

12-200105-000 Flanged Oilite Bearing 68

12-250010-007 X-Washer Pin 65

12-250010-011 X-Washer Pin 64

12-250075-000 Sleeve Oilite Bearing 66

12-250076-002 Flat Washer - Non-Standard 59

12-250091-000 Sleeve Oilite Bearing 66

12-250248-000 Sleeve Oilite Bearing 67

12-252360-000 Flat Washer - Non-Standard 59

12-300172-000 Compression Spring 77

12-350023-002 X-Washer Pin 65

12-350126-000 Compression Spring 77

12-400122-000 Compression Spring 77

12-400138-002 Machine Key - Square 63

12-400138-003 Machine Key - Square 63

12-400138-004 Machine Key - Square 63

12-400138-006 Machine Key - Square 63

12-400138-007 Machine Key - Square 63

12-400138-008 Machine Key - Rectangular 63

12-400199-000 Flanged Oilite Bearing 69

12-450006-002 X-Washer Pin 65

12-502114-000 Tension Spring 78

12-502167-000 Tension Spring 78

12-750410-000 Managers Control Panel Rocker Switch 42

12-860109-000 Ballast A•2 (115 volt) 43

12-860770-000 Pin Lamp Holder 43

12-862267-001 Flat Head Socket Cap Screw 52

15-609567-000 Light Bulb 43

17-213927-000 Light Bulb 43

28-201739-000 Bowling Service Parts Catalog 39, 41

46-040170-004 Roller 17

47-011053-004 Deﬂection Chain Gear 7, 19

47-011130-004 Bearing Bolt 7

47-013532-009 Pin Shovel Assembly 7

47-013817-004 Status Light Bulb 6

47-013871-004 Master link with pin 30

47-013872-004 Elevator chain break tool 30

47-013873-004 Elevator Chain Repair Kit 30

47-013951-003 Wedge Guide 7

47-013990-002 Elevator Guard 7

47-013991-001 RH Front Pin Deﬂector 7

47-013992-001 LH Front Pin Deﬂector 7

47-014008-003 5/8'' Chain w/ Shovel Pins 7

47-014009-004 Spacer 7

47-014017-003 Shovel Guide 7

47-014060-003 Ejector 7

47-014687-004 Trouble Light Assembly - Consolidated 6, 7

47-014761-003 Centering Guides 7

47-014917-009 Pin Count Switch - GS 96 and prior 7

47-014918-003 GS 98/GS-X 7

47-015646-004 Trouble Light Assembly - Nex Gen 6, 7

47-020908-003 End Cap w/Bearing (2-Stud) 9

47-020942-003 Roller 9

47-020943-004 Roller Bushing 9

47-020947-003 Bearing Block 15

47-020948-003 Transverse Bar 15

47-020953-004 Stop Collar 15

47-021010-003 Impact Strip 14, 15

47-021084-004 Pit Curtain 14

47-021108-004 Spacer 15

47-021110-004 Spacer 15

47-021466-001 Bearing Block 15

47-021619-002 Protector Wedge - 10 pin side (R.H.) 26

47-021620-002 Protector Wedge - 7 pin side (L.H.) 26

47-021872-003 Top Ball Cushion Board 15

47-023660-004 Cushion Cap 7, 15

47-023663-004 Rubber Washer (GS-92) 9

47-023669-002 Rear Roller Assy (Long Pit) 9

47-023915-004 Rubber Spacer 9

47-023933-004 Sha - Front 9

47-023959-003 Front Board Assembly 9

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

www.brunswickbowling.com | 85

47-023981-002 Roller Assy, 3-stud (Front) 9

47-024004-003 V-Belt Pulley 8

47-024036-002 Pin Deﬂector Support Bracket 7

47-024077-003 Transverse Bar, Short Pit 15

47-024093-004 Threaded Rod 10mm x 140mm 8, 9

47-024094-003 Housing 9

47-024309-004 Spring 9

47-024330-004 V-Belt Pulley 100mm 9

47-024735-009 RH Transport Band Side Frame 9

47-024736-009 LH Transport Band Side Frame 9

47-024740-004 Finishing Washer 5.3mm x 28mm x 10.2mm 9

47-024741-004 Flat Washer (GS-96 and above) 9

47-024744-009 Board Screw Kit 10mm 9

47-024838-005 Polycord 15mm 22

47-024839-002 Rear Distributor Drive Pulley 20

47-024905-001 RH Short Roller Assy (Rear) Even Lane 9

47-025044-009 Ball Cushion Board with Facing - LH 14, 15

47-025045-009 Ball Cushion Board with Facing - RH 14, 15

47-025049-004 V-Belt Pulley 125mm 9

47-025051-001 LH Short Roller Assy (Rear) Odd Lane 9

47-025175-003 LH Rear Board Assy, odd lane 9

47-025176-003 RH Rear Board Assy, even lane 9

47-025178-003 Bearing (3-Stud) w/ bushing 9

47-025638-004 Spacer 15

47-025639-009 AP - Ball Cushion Frame with Bracket 14, 15

47-026102-009 AP Impact Strips (2/pkg) 4, 14, 15

47-026103-000 RH Pin Deﬂector (8 mm) 7

47-026104-000 LH Pin Deﬂector (8 mm) 7

47-026370-009 Spacer Bushing - 21 mm (Pkg of 2) 9

47-026371-009 Spacer Bushing - 13.5 mm (Pkg of 2) 9

47-030276-004 Ball Door Arm Tension Spring 27

47-031054-002 Ball Door (use for RH and LH) 27

47-031055-003 RH Ball Door Key 27

47-031056-003 LH Ball Door Key 27

47-031058-001 Arm (use for RH and LH) 27

47-031796-002 Holder 27

47-031797-002 Locking Bolt 27

47-031822-004 Lever 27

47-033555-009 LH Ball Door with Arm 27

47-033556-009 RH Ball Door with Arm 27

47-033557-009 LH Locking Mechanism Complete 27

47-033558-009 RH Locking Mechanism Complete 27

47-034767-004 Tension Spring (Ball Door) 26

47-035240-001 Protector Plate, 10 pin side 26, 27

47-035241-001 Protector Plate, 7 pin side 26, 27

47-041526-004 R.H. Pusher Rod 17

47-041721-002 Gutter Adapter 16, 17

47-041774-004 Bracket 17

47-041794-009 Sweep Release Assembly - Tower Up 16

47-042056-003 L.H. Pusher Rod 17

47-044802-009 Sweep Board w/Felt (Brown) 17

47-044927-003 Sweep Board Only (Grey) for GS-98, GS-X 17

47-044978-004 GS Sweep Foot Cap 16, 17

47-044979-004 Rubber Bumper 17

47-045010-002 Sweep Wagon Frame 16, 17

47-045082-004 Sweep Board Decal (GS-98) 17

47-045373-004 Sweep Board Decal (GS-X) 17

47-045566-009 Sweep Release Assembly - Tower Down 16

47-050308-004 Damper 13

47-051565-002 Toothed Rack (front) 11

47-051616-004 Gear 11

47-051617-004 Spacer Bushing 11

47-051625-004 Sha Support 11

47-051632-004 Gear 11

47-051633-004 Spacer Bushing 11

47-051635-001 Geared Rack 11

47-051674-004 Table Latch 10

47-051682-004 Stop 11

47-051758-003 Damper 10, 11

47-051758-500 AP - GS Oversize Spotting Tong Damper 10, 11

47-051758-600 AP - GS Oversize Spotting Tong Damper 10, 11

47-051762-004 Connecting Link 11

47-051770-600 Double Damper - Standard 4, 10, 11

47-051771-600 Double Damper - Oversized 4, 10, 11

47-052020-004 Gear 11

47-052021-004 Spacer Bushing 11

47-052022-004 Spacer Ring 11

47-052124-004 Counter Weight 13

47-053513-009 Toothed Rack (center) 11

47-053635-004 Micro Switch - Single, cherry 12

47-053812-004 Switch Protector 11

47-053850-009 Pinholder Assembly - GS-10 and GS-92 12

47-054298-001 Pin Detector Plate w/Pin 13

47-054689-009 Pin Holder w/ Dampers - GS-10, GS-92, GS-96 - GS-98 12

47-054699-009 Pinholder Assembly - GS-96 - GS-98 12

47-054700-004 Micro Switch - Double 12

47-054896-002 R.H. Tong 11

47-054897-003 L.H. Spotting Tong Pivot 11

47-054898-003 R.H. Spotting Tong Pivot 11

47-054899-003 Gear 11

47-054900-003 LH Lever (1, 4, 5, 6) 11

47-054901-003 RH Lever ( 2, 3, 7, 8, 9, 10) 11

47-054902-002 Deck Plate 11

47-054980-201 Pin Holder w/ Dampers - GS-X/CPO 12, 13

47-054981-002 Pin Gripper 13

47-054982-002 GS-X Switch Finger 12, 13

47-054983-002 Drive 13

47-054984-004 Gear 13

47-054985-001 Switch Actuator 12, 13

47-054986-004 Grip Ring 13

47-054987-004 Solenoid Spring 13

47-054988-003 Switch Button 13

47-054989-001 Setting Table Lever 10

47-055001-004 Clip (Micro Switch) 13

47-055002-002 Link Assembly 10

47-055003-004 Mount Plate 13

47-055004-004 Solenoid Plunger 13

47-055005-004 Tension Spring 13

47-055006-004 Torsion Spring 13

47-055008-004 Tension Spring 13

47-055117-009 Spotting Tong (1,4,5,6) 11

47-055118-009 Spotting Tong (2,3,7,8,9,10) 11

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

86 | www.brunswickbowling.com

47-055148-002 L.H. Tong 11

47-055166-009 Setting Table Complete, GS-10/GS 98 11

47-055167-003 Cable Guide 10

47-055177-001 Setting Table Assembly Frame, GS-X 11

47-055314-009 Pinholder Assembly - GS-X/CPO 12, 13

47-055323-004 Micro Switch - GS-X 12, 13

47-055328-003 Connector Clip 13

47-055785-004 Mount Plate - Steel 13

47-070386-004 Counter Weight 19

47-071449-609 GS Metal Pinion Gear 18

47-071591-004 Sprocket Sha 19

47-071602-004 Compression Spring 15

47-071615-004 Square Sha Gear 11

47-071702-003 Gear Assembly with Hub 18

47-071705-004 Pinion Sha 18

47-071876-001 Frame (Adjustable B-Switch) 19

47-071879-003 Cam 19

47-072307-004 Reed Switch (Red Box) 19

47-073534-004 “A” Switch (Red Box) 19

47-075188-001 Frame (Fixed B-Switch) 19

47-075352-004 Pivot Bearing 19

47-075356-003 Crank 19

47-075357-003 Crank Arm 19

47-075473-003 Switch Support 19

47-075474-009 AP - Chain Gear 4, 18, 19

47-075476-004 Sha 19

47-075482-002 Guide Beam 19

47-075486-004 Chain 19

47-075488-004 5/8'' Chain 19

47-085348-003 Bearing Housing 19

47-085349-003 Tube Guide 12, 19

47-085430-003 L.H. Guide Support Bracket 19

47-085436-003 R.H. Guide Support Bracket 19

47-085449-003 Support Rod 19

47-090547-004 Spur Gear with 25mm Collar 20, 21

47-090969-003 Pin Stop 21

47-090989-002 Double Pulley 21

47-091277-002 Slider Assembly - Mount only 20, 21

47-091284-002 Slider Assembly - Complete 20, 21

47-091890-002 Pin Shield (2, 3, 8, 9, 10) 21

47-092206-004 Sha 21

47-092211-002 Pin Shield (1, 6) 21

47-092300-004 Polycord 12mm 21, 22, 23

47-092300-005 Polycord 13mm 21, 22

47-092301-000 Polycord 12.7mm - Blue 22

47-092415-003 Pulley with Bearing 21

47-092527-000 Overﬂow Chute Pin Wipe for Metal Chute 24

47-092529-600 Sock - Heavy Duty (White) 25

47-093547-004 Gear 21

47-093587-004 Dowel Pin 3mm x 15mm 21

47-093749-004 Bracket 25

47-093760-002 Pin Shield (7) 21

47-093863-003 Round Belt Pulley 20, 21

47-093874-004 Clamp 21

47-093876-004 Belt Cutter 30

47-093900-003 Rear Distributor Gear 20

47-093906-001 R.H. Pin Guide Wedge 23

47-093925-004 Spacer 23

47-093929-001 L.H. Pin Guide Wedge 23

47-094346-003 Bearing Shell with Shoulder 21

47-094347-003 Bearing Shell 21

47-094349-001 Front Sha Assembly 21

47-094351-003 Washer 21

47-094353-004 PVC Spacer 21

47-094712-003 Bracket 21

47-094778-001 Universal Housing 20

47-094782-003 Universal Release Lever - Button only 20

47-094789-003 Retaining Pins 20

47-094790-009 Square Spindle 20

47-094792-009 Universal Pin Station 5, 20

47-094793-009 Universal Pin Station 5, 20

47-094794-009 Universal Pin Station 5, 20

47-095050-003 Plastic Bearing 21

47-095103-001 Smart Shark Guide - LH 22, 23

47-095104-001 Smart Shark Guide - RH 22, 23

47-095105-003 Slide 23

47-095106-001 GS-X Shark Fin 22, 23

47-095107-003 Housing 23

47-095108-001 Shark Switch Assembly 23

47-095109-004 Spacer - long 23

47-095111-004 Solenoid Plunger 23

47-095112-004 Spacer - short 23

47-095154-009 Universal Release Lever - Complete 20

47-095609-002 Slider Assembly - Slider only 20, 21

47-095726-004 Mounting Plate 25

47-095727-004 Pressure Plate 25

47-095728-004 Angle Bracket 25

47-095729-004 Mounting Bracket 25

47-095737-001 R.H. Overﬂow Chutes 24, 25

47-095738-001 L.H. Overﬂow Chute 24, 25

47-095739-009 Overﬂow Chute Assembly without Sock - LH 24, 25

47-095740-009 Overﬂow Chute Assembly without Sock - RH 24, 25

47-095744-004 Round Belt Geared Pulley 22, 23

47-095745-004 Round Belt Pulley - Non Geared 23

47-097132-000 Belt Welding Iron - 115V 50/60Hz 30

47-097133-000 Belt Welding Iron - 230V 50/60Hz 30

47-097136-000 Teﬂon Heat Plt, PQ-18 Belt Welder 30

47-097417-000 Pin Guide/Stop 4, 20

47-097509-000 OEM Overﬂow Sock 24, 25

47-142594-000 Switch Guard 29

47-142657-000 LH Harness Deck Power Motor Assmbly 29

47-142657-010 RH Harness Deck Power Motor Assmbly 29

47-142659-000 Harness Transformer Assembly 28, 29

47-142660-000 Black Power Switch/Cable 29

47-142661-000 LH Harness Sweep Motor Power Assembly 29

47-142661-010 RH Harness Sweep Motor Power Assembly 29

47-142663-000 AC Power In Cable Assembly 29

47-142664-000 LH Pin Light Power Cable 29

47-142664-010 RH Pin Light Power Cable 29

47-142692-000 Transformer/Harness - Double 28, 29

47-142693-000 Transformer to CPU Cable 29

47-142700-000 CPU to High Voltage Logic Cable Assembly 14'' 29

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

www.brunswickbowling.com | 87

47-142712-000 Emergency Stop Contactor 28

47-142736-404 CPU PCB Nex Gen Controller 29

47-142736-820 2002-2003 CPU board upgrade 28

47-223170-000 12 Volt Bulb 6, 7

47-225722-004 Dual Pin Light Fixture 43

47-225723-004 Pin Light Fixture - Standard 43

47-226294-004 Ballast for 230 volt Pinlight 31

47-243027-004 Switch - Complete 11

47-243028-004 OOR Switch Tower Down 19

47-243029-004 Magnetic “B”, “C”, “D” Switch 19

47-245164-001 Setting Table Harness 11

47-245420-004 Setting Table Cable Assembly (Nex Gen) 5, 10

47-273865-009 Metric Tool Kit 30

47-274332-002 Bearing Block Repair Kit 9

47-274669-004 Two-Piece Spur Gear - Rear 20

47-274888-009 Ball Door Flap Kit 14, 15

47-275620-009 Setting Table Repair Kit 10, 11

47-275730-009 Distributor Repair Kit 21

47-275731-009 AP - Overﬂow Chute Upgrade Kit 24

47-275746-009 Two Piece Spur Gear - Front 20, 21

47-275748-009 Distributor Round Belt Pulley 20, 21

47-275804-009 Polycord 12mm 22

47-275812-009 AP - Overﬂow Sock Pin Cleaner Kit 24

47-275850-009 Setting Table Repair Kit 10

47-276153-009 Side Frame Repair Kit 8, 9

47-277134-009 Belt Welding Kit 115V 50/60Hz 30

47-277135-009 Belt Welding Kit 230V 50/60Hz 30

47-277455-009 Ball Stop 5

47-860001-000 Belt Welding Installation Tool 30

47-860003-000 AP - Pin Wipe 24, 25

47-860005-000 Pivot Pin - Pkg of 10 13

47-860009-000 Polycord Round Belt Trim Tool 22, 30

47-860009-001 Replacement Blades - Pkg of 2 22, 30

47-860011-000 GS-X Table Safety Support 12

47-860012-000 GS-X Pin Cleaner Kit Mop Covers 5, 24

47-860013-000 O-Ring - Pkg of 4 9

47-860016-000 Pkg-Arm, Pin Count Switch (6) 7

47-860021-000 GS Pinsetter Touch-Up Paint 30

47-861001-001 R.O. Hex Head Cap Screw 5mm x 25mm 25

47-861008-001 Truss Head Screw 6mm x 16mm 11

47-861010-001 Flat Washer 13mm - Pkg of 20 15, 17, 19

47-861011-001 Flat Washer 17mm - Pkg of 10 9, 17

47-861018-001 Slotted Pan Head Screw 8mm x 60mm 9

47-861028-001 Shim Washer 25mm x 36mm x 1mm 21

47-861029-001 Flat Washer 16mm - Pkg of 10 17

47-861031-001 Flat Washer 18mm - Pkg of 10 19

47-861040-001 Washer 6.1mm - Pkg of 10 13

47-861042-001 Rubber Washer (GS-96 and above) 10/pkg 9

47-861043-000 Plastic Retaining Bow Bushing 20

47-861044-000 Retaining Ring 20

47-861045-000 Steel Sha 20

47-861046-000 AP - Consolidated Rear Display Package 6, 7, 28

47-861047-000 AP - Status Light Bulb - 24 volt LED 7

47-861048-403 AP - Nex Gen Rear Display Package 4, 6, 7, 28

47-861049-009 O-Ring - Pkg of 5 14, 16, 18

47-861050-000 Speed Nut 8 mm (10/pkg) 11

47-861052-000 Cable Guide Clips 10

47-862011-000 GS Sweep Foot Cap Upgrade Kit 16

47-862100-000 LCD Nex Gen Package 28

47-862108-000 Cushion Adjustment Hardware Kit 14, 15

47-862507-000 Pin Feed Extender Kit 5, 6, 7

47-862508-000 Drill ﬁxture 6, 7

47-862509-403 Nex Gen Firmware w/ two 24 volt LED bulbs 6

47-862770-000 Belt Welding Clamp 30

47-862787-000 PROTECTIVE COVER 26

47-862804-000 GS Electrical Tool Kit 31

47-862854-000 3.15 Amp Fuse 29

47-862855-000 8 Amp - Ceramic Fuse 29

47-862856-000 .5 AMP - Slow Blow Fuse 29

47-862857-000 Keyboard Membrane 29

47-862859-000 High Voltage PCB Nex Gen Controller 29

47-862863-000 I/O PCB Assembly 29

47-862866-404 Nex Gen Controller Assembly 29

47-862867-000 Emergency Stop Upgrade Kit 28

47-862877-403 Nex Gen Firmware 6, 28

47-862931-000 Retaining Bow Extender Sleeve 20

47-862932-000 Accelerator Non-Slip Plate 26, 27

47-863001-000 LED Light Fixture - ONLY 5, 28, 43

47-863013-000 Pkg-Led Pindeck Repl Panels (3) 43

47-863014-000 Pkg-Power Supply-OS-8080 43

47-863015-000 Pkg - Main Control PCB Brd - OS-8080 43

47-863016-000 Led Pindeck Light Spare Parts Kit 43

47-900011-000 Spud Wrench 30

47-900012-000 Gauge Block 30

47-902401-000 GS Preventative Maintenance Wall Chart 31

53-100415-010 Hand Dryer Hose - 2000 Twin Line 39

53-400009-227 Throat Insert–Dark Gray w/Silver Logo 39

53-400009-229 Throat Insert–Graphite w/ Silver Logo 39

53-400027-002 Throat Insert–Black w/Black Logo 39

53-400041-000 Hand Dryer Hose - Frameworx 39

53-400043-XXX Vent Decal 39

53-400044-000 Hood Lip Trim 39

53-400048-227 Side B Logo Assembly - Black 39

53-400048-229 Side B Logo Assembly - Graphite 39

53-400049-227 Ball Rail Extrusion - Single - Black 38

53-400049-229 Ball Rail Extrusion - Single - Graphite 38

53-400057-XXX Wear Strip 39

53-400067-000 Decal - Ball Rack Hand Warning 38

53-400092-000 Replacement Logo "Brunswick" 38, 39

53-400097-000 L.H. Exit Track Only (Light Gray) 39

53-400097-003 L.H. Exit Track Only (Graphite) 39

53-400097-205 L.H. Exit Track Only (Black) 39

53-400099-000 R.H. Exit Track Only (Light Gray) 39

53-400099-003 R.H. Exit Track Only (Graphite) 39

53-400099-205 R.H. Exit Track Only (Black) 39

53-400103-XXX Front Decal 41

53-400111-XXX Rear Decal 41

53-400165-000 Adapter Plate (Dark Gray) 41

53-400165-100 Adapter Plate (Silver) 41

53-400270-000 Ball Return End Cap - Top (Light Grey) 39

53-400270-003 Ball Return End Cap - Top (Graphite) 39

53-400270-205 Ball Return End Cap - Top (Black) 39

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

88 | www.brunswickbowling.com

53-400271-000 End Cap - Lower (Light Gray) 39

53-400271-003 End Cap - Lower (Graphite) 39

53-400271-205 End Cap - Lower (Black) 39

53-400278-000 Vent - Ball Rack (Dark Gray) 39

53-400278-003 Vent - Ball Rack (Graphite) 39

53-400278-205 Vent - Ball Rack (Black) 39

53-400487-000 Decal - No Hands in Ball Return 38

53-400494-000 Decal - Max Number of Balls in Rack 38

53-520026-000 Power Li Idler Pulley Assembly 37

53-520040-000 Rubber Power Li Track 35

53-520060-000 Ball Li Wheel Assembly 34, 38

53-520066-000 Power Li Drive Sha 36

53-520073-000 Ball Transition Assembly 37

53-520171-000 Rubber Power Li Track 35

53-520172-000 Leather Power Li Track 35

53-520235-000 Poly V-Belt 34

53-520235-600 AP - High Friction Poly V-Power Li Belt 34

53-520244-000 Power Li Idler Pulley Assembly 37

53-520663-001 Lower Pulley Assembly 37

53-520678-000 Ball Li Track Assy - FX - R.H. 35

53-520679-000 Ball Li Track Assy - FX - L.H. 35

53-520686-000 Rubber Power Li Track 35

53-520696-001 Ball Li Weldment Assembly (Metric) 37

53-520723-000 Ball Li Hood Retainer Clips (2/pkg) 39

53-529999-000 1/3 HP, 1150/950 RPM Power Li Motor 36

53-600176-000 Reﬂector only 42

53-600181-003 Sensor Assembly 42

53-600181-005 Tel-E-Foul PCB 42

53-860322-010 B/L Motor 36

53-860328-000 1/4 HP, 1425/1725 RPM Power Li Motor 36

53-860395-000 Frameworx Seat 45º Swivel 40, 41

53-860431-000 Brunswick’s Handy Conversion Kit 34

53-860458-000 FX Ball Rack Safety Replacement Switch 38

53-860555-000 Power Li Clutch 36

53-860628-115 Transformer - 115 volt 42

53-860629-230 Transformer - 230 volt 42

53-860648-000 Brunswick Side Plate Logo Package 39

53-860937-000 Ball Return Hood Assembly - Light Gray 39

53-860959-000 FX Contour Seat Pkg. (Light Gray) 40, 41

53-860959-004 FX Contour Seat Pkg. (Graphite II) 40, 41

53-860960-XXX Frameworx Color Seat Kit 40, 41

53-861005-101 Frameworx Touch-Up Paint 40

53-861010-XXX Plastic Fastener (Pkg. of 10) 41

53-861026-227 Ball Rail Extrusions Package - Black 38

53-861026-229 Ball Rail Extrusions Package - Graphite 38

53-861026-XXX Ball Rail Extrusion Package 39

53-861034-002 Ball Return Hood Assembly - Silver 39

53-861034-205 Ball Return Hood Assembly - Black 39

53-861059-115 Pkg 115V Hand Dryer Fan 38

53-861059-230 Pkg 230V Hand Dryer Fan 38

53-861066-000 Seat Back Cap (Dark Gray) 41

53-861076-000 Tel-E-Foul System 42

53-861077-000 Conversion Pkg - 24V to 115V 38

53-861090-227 Ball Return Color Kits With "B" Logo - Black 38

53-861090-229 Ball Return Color Kits With "B" Logo - Graphite 38

53-861122-002 Ball Return Color Kits Without "B" Logo - Graphite 38

53-861122-205 Ball Return Color Kits Without "B" Logo - Black 38

53-861126-000 FX Ball Hood Throat Package - Dark Gray 38, 39

53-861126-003 FX Ball Hood Throat Package - Graphite 38, 39

53-861126-205 FX Ball Hood Throat Package - Black 38, 39

53-861127-000 FX Ball Rack Reset Switch - Dark Gray 38, 39

53-861127-100 FX Ball Rack Reset Switch - Silver 38, 39

53-861127-205 FX Ball Rack Reset Switch - Black 38, 39

53-861133-606 FX Ball Return Storage Rack 38

53-861133-608 FX Ball Return Storage Rack 38

53-861147-606 FX Ball Return Storage Rack 38

53-861147-608 FX Ball Return Storage Rack 38

53-861149-000 FX Ball Rack Safety Switch - Complete 38

53-861674-000 Intellishield Ball Return Guarding System 4, 37

54-100260-000 Drink Holders 40

54-860511-001 Striking Line Wood Seat - Dark Cherry - Style A 40

54-860511-002 Striking Line Wood Seat - Natural - Style A 40

54-860512-001 Striking Line Wood Seat - Dark Cherry - Style B 40

54-860512-002 Striking Line Wood Seat - Natural - Style B 40

54-860513-001 Striking Line Wood Seat - Dark Cherry - Style C 40

54-860513-002 Striking Line Wood Seat - Natural - Style C 40

54-861080-000 Striking Line Chair Glides 40

54-861106-XXX Easton Striking Line Seat Bucket 40

54-861107-XXX Montgomery Striking Line Seat Bucket 40

54-861108-XXX Broderick Striking Line Seat Bucket 40

54-861109-XXX Wayland Striking Line Seat Bucket 40

54-861110-XXX Alden Striking Line Seat Bucket 40

57-860109-000 Reset Button Kit 42

57-860507-000 Reﬂector Assembly 42

57-860607-002 Tactile Switch Keyboard - Black Keys 42

57-860608-002 Tactile Switch Keyboard - White Keys 42

57-860935-227 Accent Decals - Overheads - Black 40

57-860935-229 Accent Decals - Overheads - Silver 40

57-863397-400 Frameworx Console Flash Drive Kit 42

57-863670-000 Ball Detect - Single 42

57-866867-000 Dual Pedestal - Dark Gray - Non-Pivot 42

57-866867-100 Dual Pedestal - Silver 42

57-900102-000 Molex round extractor 31

57-900103-000 Molex Crimper 31

57-900108-000 Miller Cutter/Stripper 31

84-860602-000 Tel-E-Foul Division Cover 42

84-860769-000 Tel-E-Foul Return Cover with Lenses 42

84-860770-000 Tel-E-Foul Lens Set RH and LH 42

84-860902-000 “DO NOT CROSS FOUL LINE” Safety Decal 43

90-520060-000 Urethane Ball Li V-Tire 34

90-520060-600 Urethane Foam Ball Li Tire 34, 38

90-520075-600 AP - Urethane Transition Tracks 37

90-520171-000 Santoprene Ball Li Track 35

90-520171-600 AP - Urethane Foam Ball Li Track 35

90-520172-600 AP - Frameworx Ball Li Track 35

90-750069-000 Urethane (No-Bounce) Mallet 30

99-010103-004 Plastic Bearing 17

99-010108-004 Bearing 15

99-010123-004 Accelerator Motor Mount Bushing 26

99-026121-000 Ball Cushion Hydraulic Shock Assembly 14, 15

99-030363-004 Accelerator Motor-208/230/380 26

99-040249-004 Sweep Roller Assembly 16, 17

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

www.brunswickbowling.com | 89

99-046122-000 Sweep Shock Absorber 16

99-060219-004 Solenoid Assembly 27

99-060242-004 Pinholder Solenoid 12

99-060351-004 Pinholder Solenoid 12, 13

99-060387-004 Solenoid Consolidated/Nex Gen 22, 23

99-070356-004 Ball Door Solenoid 26

99-076120-000 Stroke Limiter Shock Absorber 18

99-076123-000 Stroke Limiter Shock Absorber 18

99-076362-000 Accelerator Motor-208/230/380 18

99-076363-000 Distributor Motor 18

99-076364-000 Table Motor 18

99-076365-000 Table Motor 18

99-076366-000 Sweep Motor 18

99-076367-000 Sweep Motor 18

99-090348-004 Spring 23

99-090349-004 O-Ring for Plunger 13, 23

G34-205116-000 Chain Lube 31

PART # DESCRIPTION PAGE PART # DESCRIPTION PAGE

90 | www.brunswickbowling.com

SAFETY | PROCEDURES

PINSETTER SAFETY REGULATIONS

• The head mechanic must teach all personnel who will work on the

pinsetter enough about the machine to prevent accidents through

ignorance.

• Always open the pinsetter circuit breaker or disconnect the pinsetter

power plug from the electrical box before working on the machine.

• When the pinsetter shuts itself oﬀ electrically, be sure to open the circuit

breaker and disconnect the pinsetter power plug from the electrical box

before looking for, and clearing, the cause of the jam.

• Always reach over or around the machine assemblies, never through or

between the shas, arms and levers.

• Use the appropriate rods to securely lock the rake compression spring

guide tube before maintaining the rake or deck.

• The desk person must never turn on a machine from the manager’s

control desk without ﬁrst making sure that no one is working on the

machine.

• Position the rake in its down position when working on the front of the

machine to prevent being hit by a bowling ball.

• When more than one person is working on the machines, never turn on a

machine without checking to see if everyone is clear of the machine.

• Under no circumstances allow an unqualiﬁed person to work on the

pinsetter.

SAFETY TIPS AND GENERAL SAFETY REGULATIONS

Following basic safety procedures can help avoid injury. As with all

machinery, there is an element of risk working on the pinsetter if the rules

of safety are disregarded. Common sense, a knowledge of pinsetters and

a knowledge of basic safety procedures will prevent injury to personnel

working on the machines.

Wear the proper clothing when working on the

pinsetter. Don’t wear neckties or loose clothing that

may get caught in the machine. Wear pants without

cuﬀs to prevent tripping. Wear shoes with safety,

non-slip soles.

Partial schematics are listed in each section.

For full pinsetter and bowling schematics,

visit our website at www.brunswickbowling.com/service-support/

tech-support

Use the right tool for each job to prevent injury to

yourself and to the machine. Remove all tools from the

pinsetter before turning it on.

Avoid the use of cleaners that are toxic.

To prevent slipping, immediately wipe up any oil or

liquids that have spilled.

Store oily rags and any other combustibles in a

ﬁreproof container.

When the safety guards are removed from the

pinsetter, be extra cautious while the pinsetter is

turned on. Replace the guards immediately when the

work is complete.

www.brunswickbowling.com | 91

SUPPORTING YOUR NEEDS

Since 1968, Brunswick Electronic Repair has

supported Brunswick scoring equipment.

Currently, we support repairs on products from

1985 through today including:

FRAMEWORX®

VECTOR®

SYNC™

We also repair electronic products related to

Electronic Triggering, Tel-e-foul™,

Pinball Wizard™, GS® Series Pinsetters,

Envoy® and Authority22® lane machines.

GETTING YOU UP AND RUNNING  FAST!

We understand that electronic repairs can

mean costly down time, which is why we oﬀer

three convenient methods of exchange and

repair:

PRESHIP EXCHANGE

You can request rebuilt assembly from our

stock be pre-shipped to your center. Getting

you from down and out to up and running fast!

ASSEMBLY EXCHANGE

You send in a repairable assembly, in exchange

we send you a previously rebuilt unit back.

ASSEMBLY REPAIR

You send in an assembly for repair, we

repair that unit and send it back in operating

condition.

OUR WORK IS GUARANTEED

Our goal is to ship you a high-quality, ready

to use assembly. We back it up with a 90-day

warranty on our rebuilt assembly materials and

workmanship. We trust you won’t need it.

To place an order or receive additional

information contact us at:

IN NORTH AMERICA 

BRUNSWICK ELECTRONIC REPAIR

Brunswick Bowling Products

525 West Laketon Ave.

Muskegon, MI 49441

Toll Free 24 hrs: 800-937-2695

Direct Dial: 231-725-3370

Fax: 231-725-4778

Email: [email protected]

Website: http://www.brunswickbowling.com

IN CANADA  FRENCH/ENGLISH SPOKEN

Striker Bowling Solutions

#9 505 Iroquois Shore Road

Oakville, ON Canada L6H 2R3

Tool Free: 800-232-2369 ext. 5

Fax: 866-789-2695

OUTSIDE OF NORTH AMERICA:

CONTACT YOUR LOCAL AUTHORIZED

BRUNSWICK DISTRIBUTOR

REPAIR | BRUNSWICK ELECTRONIC REPAIR

525 West Laketon Avenue

Muskegon, MI 494412601 USA

1·800·Yes·Bowl (Options 2,2,*)

1·231·725·4966 (Options 2,2,*)

[email protected]

www.brunswickbowling.com

Go to www.brunswickbowling.com/contact to ﬁnd a local Brunswick Sales Representative

Velcro is a registered trademark of Velcro Industries. Molex is a registered trademark of Molex Incorporated. Kevlar, Teflon, Delrin, and Zytel

are registered trademarks of E.I. du Pont de Nemours and Company. Dyalon is a registered trademark of Thombert Incorporated. USBC is a

registered trademark of United States Bowling Congress, Inc. Windows is a registered trademark of Microsoft Corporation in the United States

and/or other countries. All other trademarks belong to Brunswick Bowling Products, LLC.

Brunswick is committed to continuous improvement. As a result, all specifications and options are subject to change without notice.

Not for reproduction without the express written consent of Brunswick Bowling Products, LLC.

2020 CATALOG